Building Operator Training and Re-tuning

Categories:

When:
March 15, 2017 @ 1:00 pm – 5:00 pm
Where:
Philadelphia - Delaware Valley Green Building Council
2401 Walnut St #103
Philadelphia,PA 19103
USA
Cost:
$75
Categories:

Register

Overview

The purpose of this course is to help operations and maintenance (O&M) staff learn how to operate buildings more efficiently, reduce operating cost, and provide energy savings. This course will provide prescriptive best practices for maintaining good operations, and an overview of the re-tuning process using building automation system (BAS) trend data.  Attendees will learn how to look for and optimize the control strategy for many of the common energy saving opportunities such as occupancy scheduling, temperature and static pressure control, and economizer function.  Attendees will also learn basic principles of preventative maintenance, electrical diagnostics, building commissioning, and demand response.

Intended Audience

  • Onsite O&M staff responsible for day-to-day building operations
  • O&M staff management looking to integrate the re-tuning process into their O&M procedures
  • Offsite contractors (retro-commissioning agents or control vendors) hired to improve a building’s energy efficiency

Prerequisite Knowledge

  • Basic understanding of commercial building systems (e.g. air handling units, VAV boxes, boilers, chillers)
  • Familiar with basic functions of building automation systems (BAS)

Scope

  • Prescriptive best practices for good building operations
  • Overview of the re-tuning process using BAS data
  • Actionable guidance on how to look for and optimize the control strategy of each of the following re-tuning measures:
    • Occupancy Scheduling
    • Discharge-Air Temperature Control
    • Discharge- Air Static Pressure Control
    • Air-Handling Unit Heating and Cooling
    • Air- Handling Unit Outside/Fresh Air makeup
    • Air-Handling Unit Economizer Operation
    • Zone Conditioning
    • Central Plant Optimization
  • Basic principles of the following topics and when they are most applicable:
    • Preventative Maintenance and Troubleshooting
    • Electrical and Mechanical Diagnostics
    • Building Commissioning
    • Demand Response Techniques

Learning Objectives

  1. Be able to list five low/no-cost prescriptive O&M measures that may apply to your building
  2. Be able to describe the basics of the re-tuning process, and some of the benefits
  3. List at least three examples of poor operations that can be found through the re-tuning process