RESNET Combustion Safety & Workscope (CAZ) Online Training

Categories:

When:
November 4, 2014 @ 9:00 am – November 7, 2014 @ 11:00 am
Where:
Online
Cost:
$569 / $284.50 (NYSERDA Discount)
Contact:
Lauren McFeeley(607) 277-6240 ext 282E-mail
Categories:

Register

7 PDCsfor this class

3.5 CEUsfor this class

Dates:

  • Oct. 27 – noon to 1pm (training kickoff)
  • Nov 4, 9am – 11am (training)
  • Nov 5, 9am – 11am (training)
  • Nov 6, 9am – 11am (training)
  • Nov 7 (testing)

Course Description

With increased national demand for comprehensive retrofits, the RESNET Board of Directors has made it a requirement that RESNET certified Raters must pass the Combustion Safety and Work Scope written exam and simulation prior to December 31st, 2014, to maintain the Rater Certification. This 7-hour online training designed for Raters who are also BPI certified, is conveniently spaced over just 1 week and will prepare attendees to take and pass the tests.

All existing Raters must pass both the written and simulation CAZ exams by January 1, 2015, to maintain their Rater certification.

This RESNET Combustion Safety and Workscope Training fulfill this requirement.

*Raters who are not BPI analyst certified will need an additional 2 hours of field training by the end of 2014 to comply with RESNET standards.*


Course Objectives

Targeting Health and Safety

  • Ambient Carbon Monoxide per RESNET standards
  • Measurement and protocols
  • Carbon Monoxide in unvented combustion appliances (ovens and ranges)
  • Combustible gas leakage testing

Heating and Cooling Systems

Vented Combustion Appliance Safety Testing

  • Interaction of combustion appliances and makeup air
  • Controlled and uncontrolled makeup air
  • Venting configurations and interaction with the building envelope
  • Depressurization, flame rollout, and backdraft
  • Configuring the home for Worst Case Depressurization testing
  • Measuring and documenting spillage
  • Carbon Monoxide in the venting flue
    • Variations in venting configuration and testing locations (venting & fuel types)
  • Predicting and adjusting for combustion safety problems
    • Correcting depressurization problems per RESNET protocols
    • Workscope recommendations based on CO and spillage testing results
  • Introduction to the RESCAZ training simulator
  • Differences between the BPI and RESNET testing protocols
All online sessions will be recorded for later viewing for our participants convenience.