Training Calendar

Request a Training

Are there no scheduled dates listed for the training you’re looking for? Request a training

Back to Training Home Page

April 2014 – June 2017

Apr
24
Thu
2014
Small Building Re-Tuning @ Green Light NY, Suite 609
Apr 24 @ 9:00 am – Apr 25 @ 5:00 pm

Register

Course Description

Small commercial building re-tuning training is a systematic process that is used to identify operational problems in buildings without a Building Automation System (“BAS”). Unlike building management is large commercial properties which is primarily data-driven, small commercial building re-tuning is prescriptive and does not rely on trend data collected from the building. Typically, small commercial buildings have packaged units for heating and cooling with simple air distribution, and are controlled by a zone thermostat. The process relies on the aspects of “how to” maintain and sustain building systems, identify problems and areas for improvement, and make a building and its individual systems more energy efficient.

This 2-day course is based on the publicly available curriculum developed by the Pacific Northwest National Laboratory and will teach you techniques and strategies that can be utilized to maintain building systems, make them more efficient, and target areas for improvement.

Registration includes all workshop material & continental breakfast and lunch daily.


Who’s the course for?

This training is for O&M staff (property management companies) and offsite contractors (retro-commissioning agents or controls vendors) hired to maintain and/or improve the performance of the building systems, as well as energy engineers and auditors.

May
6
Tue
2014
Discover New Features in OpenStudio v1.3.0: FREE Webinar @ Webinar
May 6 @ 1:00 pm – 2:00 pm

Register

Join PSD on May 6th, 2014 from 1:00-2:00pm EDT for a LIVE demonstration of the most exciting new features in OpenStudio v1.3.0.  As a licensed OpenStudio training and support organization, PSD is offering this webinar to raise awareness of the potential power of OpenStudio. The webinar will be led by PSD’s Vice President of Research and Development, Chris Balbach.

Features that will be covered:

 1) Support for modeling refrigeration systems: 

OpenStudio 1.3.0 introduces drag, drop and configuration capabilities to model the energy use of common commercial refrigeration systems (e.g. display cases and walk in coolers), including cascading systems. While this is not unique, the ability to integrate the energy impacts of refrigeration systems into a building’s heat balance at an adjustable sub-hourly time step provides tightly coupled feedback for estimating the interactions between energy systems.

 2) Support for modeling VRF HVAC systems 

OpenStudio provides drag, drop and configure capabilities for modeling VRF (Variable Flow Refrigerant) HVAC systems and controls of varying complexity. VRF systems can be configured to operate in either a ‘heat pump’ mode, (where the system operates in either heating or cooling mode) or in a heat recovery mode (where indoor units can recover and exchange heat with other indoor units operating in the opposite mode). In addition, the outdoor units can be configured to be air, water or evaporative cooled. User defined performance curves (generated from manufacturers published performance data) can now be used to describe equipment performance.

3) Support for modeling supply and return plenum configurations 

Forced Air HVAC systems commonly use plenums for supplying and/or returning the conditioned air. This release of OpenStudio allows users to define and configure supply and return plenums that serve multiple conditioned zones. Plenums are considered unconditioned thermal zones and are composed of children OpenStudio spaces.  The plenum zones can leverage OpenStudio’s space type definitions for rapid object and property assignments.

May
13
Tue
2014
Small Building Re-Tuning @ Schenectady, NY - NE Parent & Child Society
May 13 @ 9:00 am – May 14 @ 5:00 pm

Register

Course Description

Small commercial building re-tuning training is a systematic process that is used to identify operational problems in buildings without a Building Automation System (“BAS”). Unlike building management is large commercial properties which is primarily data-driven, small commercial building re-tuning is prescriptive and does not rely on trend data collected from the building. Typically, small commercial buildings have packaged units for heating and cooling with simple air distribution, and are controlled by a zone thermostat. The process relies on the aspects of “how to” maintain and sustain building systems, identify problems and areas for improvement, and make a building and its individual systems more energy efficient.

This 2-day course is based on the publicly available curriculum developed by the Pacific Northwest National Laboratory and will teach you techniques and strategies that can be utilized to maintain building systems, make them more efficient, and target areas for improvement.

Registration includes all workshop material & continental breakfast and lunch daily.


Who’s the course for?

This training is for O&M staff (property management companies) and offsite contractors (retro-commissioning agents or controls vendors) hired to maintain and/or improve the performance of the building systems, as well as energy engineers and auditors.

Jun
17
Tue
2014
Fundamentals of Measurements and Verification @ Albany, NY
Jun 17 @ 9:00 am – Jun 19 @ 5:00 pm

Register

Course Description

Presented by PSD and the Association of Energy Engineers (AEE) this comprehensive training course is designed to provide the necessary training for those seeking to achieve the status of Certified Measurement and Verification Professional (CMVP). More details about the CMVP designation can be found at www.aeecenter.org/certification/CMVP.

Proven energy savings are now playing a significant role in financing energy management programs, whether through energy performance contracts or through emission trades under schemes such as the clean development mechanism of the UNFCCC. While interest in savings data is growing, the state of the art in determining savings has also been rapidly evolving. This seminar will examine current best practices for determining and documenting savings, specifically reviewing the current edition of the International Performance Measurement & Verification Protocol (IPMVP).

Attendees will learn the process of designing a proper M&V program for their projects, including cost/accuracy tradeoffs, baseline adjustments, interactive effects, types of savings, maintaining transparency, and analysis methods. Examples of specific techniques will be presented, along with common pitfalls which can result in unreliable savings reports. These techniques are central to management under the new ISO 50001 standard for Energy Management Systems. Class time will include problem solving and debate.

Through participating in a “fundamentals” course, persons experienced in M&V will also appreciate the assembly of all of the issues, the debates, and engagement at their own level with expert instructors.  The CMVP exam will be administered at the close of instruction on day three of each seminar to those who have qualified in advance to sit for the exam by submitting a completed CMVP application and fee. Advance reading of IPMVP Volume I (available at www.evo-world.org) would be useful reading before the exam, though not required.

Accreditation: 2 AIA CEUs, 20  PDHs

Registration includes all workshop material & continental breakfast and lunch daily.


Course Outline

Reasons for M&V
• Types of uses for M&V
• M&V’s role in financing

Current M&V Protocols
• Relationship of IPMVP and other guidelines

IPMVP
• Its evolution
• Overview of IPMVP Options A, B, C & D

Developing an M&V Plan
• Principles of M&V
• Scope of energy to be monitored
• Differences between M&V for industry and for buildings
• “Cost avoidance” or “normalized savings?”
• Choosing independent variables for routine baseline adjustments
• Sources of data
• M&V budgets
• Selecting the baseline period and data
• Measurement systems design, commissioning & maintenance
• Baseline analysis methods
• Various forms of savings computation
• Valuing savings
• Routine procedures and QC
• Managing the uncertainty created by sampling, metering, modeling and unknowns
• Bias and rounding
• Reporting procedures
• Coordinating with other purposes
• When to do the M&V Plan

Current Issues in M&V
• Coping with missing data
• Cost/uncertainty tradeoffs
• Monitoring IAQ

Baseline Adjustment
• Why they are necessary
• Who does what, when

Key Elements of Success: Theory & Examples of IPMVP Options 

• Details of IPMVP methods
• Retrofit isolation (IPMVP Options A & B): Instrumentation issues
• Whole facility (IPMVP Option C): Utility billing issues
• Calibrated simulation (IPVMP Option D): Simulation issues
• Lessons from tough experience

Selecting Options: Which One Is Best Suited For My Project?

Adherence with IPMVP

Jun
19
Thu
2014
Free Webinar: Sneak Peek – Small Building Re-Tuning @ Free Webinar
Jun 19 @ 12:30 pm – 1:00 pm

Register

Thursday, June 19, 2014 12:30 PM – 1:00 PM EDT

Small commercial buildings often lack the sophisticated energy management and control systems found in large buildings, making them difficult to commission, operate and maintain.  Lack of proper operation and maintenance leads to inefficiencies, reduced lifetime of equipment, and, ultimately, higher energy costs.  

Please join us for a free 30-minute free overview of our Small Building Retuning training, and how it can benefit you and your business.  Learn how the training will teach you techniques and strategies to maintain building systems, make them more efficient, and target areas for improvement.  Meet our trainers, who will be on hand to share their experiences and answer your questions.

Jun
20
Fri
2014
Free Webinar: Sneak Peek – Fundamentals of Measurement & Verification @ Free Webinar
Jun 20 @ 12:30 pm – 1:00 pm

Register

Friday, June 20, 2014 12:30 PM – 1:00 PM EDT

Interest in M&V related skills as they apply to the built environment continue to grow, by building owners, practitioners, financiers and other stakeholders in the energy efficiency sector. Our Fundamentals of Measurement & Verification training provides an understanding of procedures and workflows for developing and executing M&V plans.

Please join us for a free 30-minute free overview of our Fundamentals of M&V training, and how it can benefit you and your business.

Jul
9
Wed
2014
Introduction to TREAT Multifamily Workshop @ Online Training - TREAT Masters Workshop
Jul 9 @ 1:00 pm – 3:00 pm

Register

Date: July 9th, 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will walk users through each screen of the TREAT user interface. Core energy modeling concepts will be introduced and discussed.  Participants will learn how to understand how changes made to the model affect the estimated energy consumption.

A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.  Participants are eligible for 2.0 BPI CEUs.

 

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Jul
15
Tue
2014
Small Building Re-Tuning @ Online Webinar
Jul 15 @ 12:30 pm – Jul 17 @ 2:30 pm

Register

Credits

8 PDHs for this class

Time: Two 3 hour sessions and one 2-hour session delivered  in 1 week; 12:30pm to 3:30pm Eastern Standard Time Tuesday and Wednesday, 12:30 to 2:30 pm Thursday

Dates: July 15,16, 17 2014

Course Description

Small commercial building re-tuning training is a systematic process that is used to identify operational problems in buildings without a Building Automation System (“BAS”). Unlike building management is large commercial properties which is primarily data-driven, small commercial building re-tuning is prescriptive and does not rely on trend data collected from the building. Typically, small commercial buildings have packaged units for heating and cooling with simple air distribution, and are controlled by a zone thermostat. The process relies on the aspects of “how to” maintain and sustain building systems, identify problems and areas for improvement, and make a building and its individual systems more energy efficient.

This course is based on the publicly available curriculum developed by the Pacific Northwest National Laboratory and will teach you techniques and strategies that can be utilized to maintain building systems, make them more efficient, and target areas for improvement.


Who’s the course for?

This training is for O&M staff (property management companies) and offsite contractors (retro-commissioning agents or controls vendors) hired to maintain and/or improve the performance of the building systems, as well as energy engineers and auditors.

Jul
16
Wed
2014
Introduction to Energy Modeling with OpenStudio – FREE LIVE Demo (NYSERDA focused) @ Free Webinar
Jul 16 @ 1:00 pm – 2:00 pm

Register

Join PSD on July 16th, 2014 from 1:00-2:00pm EDT for a FREE LIVE demonstration and introduction to OpenStudio.

PSD is offering this webinar to raise awareness of the suite of tools available with OpenStudio. The webinar will be led by PSD’s Vice President of Research and Development, Chris Balbach.

 

Features that will be covered:

How OpenStudio can be used to support PON 1601 New Construction Program activities

  1. Rapid creation and zoning of a building using the OpenStudio SketchUp plugin
  2. Rapid assignment of components to the building using the Building Component Library, including ASHRAE 90.1-2007 performance standards
  3. Using OpenStudio Measures to modify a building
    1. NREL BCL Measure Library – Public Domain
      • OpenStudio Measures (ASHRAE Advanced Energy Design Guides)
      • EnergyPlus Measures
      • Reporting Period Measures
    2. Customized Measures
  4. Using the Parametric Analysis Tool to design and execute simulation studies, incorporating energy cost savings and LCCA feedback
  5. Viewing output (summary and detailed)
  6. Generating Reports

About the Trainer

Chris Balbach
VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:
PE, CEM, CVMP, BESA

Jul
22
Tue
2014
Discover New Features in OpenStudio v1.4.0 @ Free Webinar
Jul 22 @ 1:00 pm – 2:00 pm

Register

Join us for a LIVE demonstration of the most exciting new features in OpenStudio v1.4.0. As a licensed OpenStudio training and support organization, PSD is offering this webinar to raise awareness of the potential power of OpenStudio. The webinar will be led by PSD’s Vice President of Research and Development, Chris Balbach.

About the Trainer

Chris Balbach

VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:

PE, CEM, CVMP, BESA

Jul
24
Thu
2014
FREE Webinar: Sneak Peek – Large Building Retuning @ Free Webinar
Jul 24 @ 12:30 pm – 1:00 pm

Register

While sophisticated energy management and control systems are used in large commercial buildings to manage heating, ventilating, and air conditioning systems and components, many buildings still are not properly commissioned, operated, or maintained. This lack of proper operation and maintenance leads to inefficiencies, reduced lifetime of equipment, and, ultimately, higher energy costs.  

This webinar gives an overview of our Large Building Retuning training, which will teach you how to identify operational problems by leveraging data collected from the building automation system (BAS) and correct those problems at no cost or low-cost.

Our trainer will be available to answer your questions.

 

Aug
6
Wed
2014
TREAT Multifamily Mid Rise Workshop @ Online Training - TREAT Masters Workshop
Aug 6 @ 1:00 pm – 3:00 pm

Register

Date: August 6th, 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will cover high rise modeling using TREAT multifamily software. A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.

Topics included:

  • Strategic creation of spaces and surfaces
  • Transformation of HVAC audit data into TREAT inputs
  • Utility Bill upload, analysis and True-up
  • DHW inputs
  • Infiltration
  • Fans
  • Lights
  • Appliances
  • Improvements
  • Packages

To benefit the most from this webinar, participants should have prior experience modeling TREAT software, or have attended the introductory webinar.

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Aug
12
Tue
2014
TREAT Multifamily 16-Hour Online Training @ Online Training
Aug 12 @ 9:00 am – Aug 15 @ 1:00 pm

Register

Dates: August 12-15th
Times: 9am-1pm

Course Description

PSD’s 16-hour comprehensive TREAT training, conveniently delivered through four four-hour live, online webinars, will expose attendees to time efficient modeling procedures and methods. Attendees will learn how to leverage the TREAT modeling software to model and evaluate typical improvement workscopes used by weatherization programs, construct energy models of multifamily buildings from ‘scratch’, and apply templates to streamline the evaluation of standardized improvements.

The course is comprehensive and will cover apartment sampling, energy model calibration, modeling strategies, data entry problem solving, billing analysis, quantifying interactions between systems, predicted energy savings, and calculating SIRs. Students will be given homework assignment each day so that they can practice building TREAT models.

Course Objectives

  • Learn how to use the “Multifamily Existing Building Improvement-Driven Modeling Process” for improving energy efficiency in multifamily buildings using TREAT
  • Integrate TREAT into the auditing process to improve overall project efficiency and productivity.
  • Build a TREAT model with an appropriate level of detail to generate savings and workscope reports
  • Demonstrate proper use of TREAT’s billing analysis tools to import a building’s actual energy bills and analyze baseline energy signatures and historical energy performance patterns
  • Incorporate ‘non-energy’ benefits (i.e. health and safety measures) into the TREAT model
  • Follow recommended procedure for ‘true-up’ of TREAT model
  • Create and analyze the investment potential of individual ECMs and interacting sets of improvements
  • Produce appropriate TREAT improvements reporting for weatherization projects
  • Use TREAT to determine actual energy savings vs. predicted energy savings

 

Modeling is now a BPI requirement. Upon completion you will be eligible to receive up to 8 continuing education units (CEUs).
Aug
14
Thu
2014
Sneak Peek – Open Studio @ Free Webinar
Aug 14 @ 12:30 pm – 1:00 pm

Register

NREL’s OpenStudio platform for EnergyPlus is changing the way building professionals approach energy modeling. Join us for a free 30-minute free overview of our Open Studio Training, and how it can benefit you and your business. Our instructor, Chris Balbach,  will lead the webinar and will answer any questions you may have about the training.

About the Trainer

Chris Balbach

VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:

PE, CEM, CVMP, BESA

Aug
28
Thu
2014
Free Webinar: Sneak Peek – Small Building Re-Tuning @ Free Webinar
Aug 28 @ 12:30 pm – 1:00 pm

Register

Thursday, August 28, 2014 12:30 PM – 1:00 PM EDT

Small commercial buildings often lack the sophisticated energy management and control systems found in large buildings, making them difficult to commission, operate and maintain.  Lack of proper operation and maintenance leads to inefficiencies, reduced lifetime of equipment, and, ultimately, higher energy costs.  

Please join us for a free 30-minute free overview of our Small Building Retuning training, and how it can benefit you and your business.  Learn how the training will teach you techniques and strategies to maintain building systems, make them more efficient, and target areas for improvement.  Meet our trainers, who will be on hand to share their experiences and answer your questions.

Sep
9
Tue
2014
Leveraging and Extending OpenStudio – Measure Authoring – ASHRAE Atlanta @ ASHRAE Atlanta
Sep 9 @ 8:00 am – 5:00 pm

Register

Course Description

This course will introduce two important and powerful topics that can be explored using the OpenStudio ecosystem – authoring of custom ‘measures’ and the numerical quantification of simulation related uncertainties. Participants will learn the fundamentals of OpenStudio measure authoring, and will gain an understanding of how the flexible OpenStudio architecture can be manipulated to accomplish simulation goals. Methods for using OpenStudio tools to determine simulation related uncertainty will be shared, along with examples studies.


Course Agenda

8:00–8:30: Arrive and ensure software is installed and configured properly

8:30–8:45: Introductions

8:45–10:15: Review OpenStudio Object Model

Overall review of OpenStudio software architecture:

  • Building / Story / Zone / Space / Surface / Subsurface
  • Loads and Load Definitions

Discussion of Inheritance hierarchy:

  • Assignment at Building vs Story vs Space Type vs Space
  • Space Types

Measures – Core Fundamentals:

  • Where measures are applied in OS workflows
  • 3 Types (OpenStudio / EnergyPlus / Reporting)
  • Best Practices – Measure Specifications

10:15–10:30: BREAK


10:30–12:00: Understanding the OpenStudio SDK

  • Major / Minor Releases
  • Available Class Lists / Objects

12:00–1:00: LUNCH


1:00–1:30: Best Practices for authoring measures

  • Text Editor vs IDE
  • Sources for sample measure code
  • Unit Testing

1:30–3:15: Hands on exercises

  • Writing an OpenStudio Measure
    • Modifying an existing OpenStudio measure
  • Writing an EnergyPlus Measure
    • Modifying an existing EnergyPlus measure
  • Writing a Reporting Measure
    • Modifying an existing Reporting measure

3:15 – 3:30: BREAK


3:30 – 4:00: Introduction to Uncertainty Analysis (UA) in building simulation

  • Probabilistic approach to building energy simulation
  • Determining uncertainty of inputs

4:00 – 4:30: Setting up the UA simulation runs in OpenStudio

  • Setting up measures to describe input parameter uncertainty
  • Creation of new measures for uncertainty analysis
  • Cloud simulation parameter inputs

4:30 – 5:00: Interpreting the results

  • Visualization tools
  • Post processing
  • Creating the savings probability distribution
Sep
11
Thu
2014
Free Webinar: Sneak Peek – TREAT Software @ Free Webinar
Sep 11 @ 12:30 pm – 1:00 pm

Register

TREAT is our award-winning energy audit software for comprehensive energy analysis and building modeling.
A winner of the prestigious R&D 100 award, TREAT is the only energy audit software approved by the DOE for all residential housing types – including multifamily. TREAT is market tested, with thousands of users enjoying accurate results for over a decade of supporting whole house energy audits.

Learn how training can help you to get the most from TREAT.  Our trainer will be available to answer your questions.

 

Sep
15
Mon
2014
OpenStudio 2-day Training @ New York, NY - Green Light NY, Suite 609
Sep 15 @ 9:00 am – Sep 16 @ 5:30 pm

Register

Accreditation:

  • Receive 14 PDHs upon completion

Course Description

This 2-day hands-on course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

Registration includes all workshop material & continental breakfast and lunch daily.

Puchase Training


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies

Course Agenda

Day 1

Use the OS SketchUp Plugin to:

  • Load templates for providing default values
  • Import idf or gbxml files generated by other tools
  • Use Sketchup tools to create building spaces (form and fabric)
  • Rapidly assign space load definitions
  • Rapidly assign properties using construction and schedule sets at different hierarchies
  • Configure spaces for daylight controls
  • Create external shading objects/surfaces
  • Collect/configure spaces into Thermal Zones and assign thermostats

Use the OpenStudio Application to:

  • Use BCL to retrieve Configure Zonal Central HVAC systems and controls
  • Configure Central HVAC systems and controls
  • Configure Service Water systems and controls
  • Add BCL measures to extend baseline model
  • Incorporate utility bills for model/billing comparison
  • Addition of measures to provide calibration roadmap

Day 2

Use Results Viewer to:

  • Graphically examine detailed mode output
  • Export detailed model output for further post-processing

Use Parametric Analysis Tool to:

  • Select and configure OS measures from the NREL BCL
  • Define simulation study by configuring Design Alternatives
  • Use the Amazon EC2 resource to execute the simulation study
  • Examine detailed model output

Special Topics

  • How to create a “measure” for use in OpenStudio
  • OpenStudio Measure
  • EnergyPlus Measure
  • Reporting Measure
  • How to share measures to the BCL
  • How to manage large simulation studies
Sep
18
Thu
2014
TREAT Multifamily High Rise Workshop @ Online Training - TREAT Masters Workshop
Sep 18 @ 1:00 pm – 3:00 pm

Register

Date: September 18th, 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

During this two hour webinar participants will create a TREAT model of a high-rise building step by step with the instructor. A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.

Topics included:

  • Strategic creation of spaces and surfaces
  • Transformation of HVAC audit data into TREAT inputs
  • Utility Bill upload, analysis and True-up
  • DHW inputs
  • Infiltration
  • Fans
  • Lights
  • Appliances
  • Improvements
  • Packages

To benefit the most from this webinar, participants should have prior experience modeling TREAT software, or have attended the introductory webinar.

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Sep
25
Thu
2014
FREE Webinar: Sneak Peek – Large Building Retuning @ Free Webinar
Sep 25 @ 12:30 pm – 1:00 pm

Register

While sophisticated energy management and control systems are used in large commercial buildings to manage heating, ventilating, and air conditioning systems and components, many buildings still are not properly commissioned, operated, or maintained. This lack of proper operation and maintenance leads to inefficiencies, reduced lifetime of equipment, and, ultimately, higher energy costs.  

This webinar gives an overview of our Large Building Retuning training, which will teach you how to identify operational problems by leveraging data collected from the building automation system (BAS) and correct those problems at no cost or low-cost.

Our trainer will be available to answer your questions.

 

Oct
8
Wed
2014
TREAT Multifamily Mastery Workshop @ Online Training - TREAT Masters Workshop
Oct 8 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: October 8th, 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will cover advanced TREAT modeling using the multifamily version. To attend this webinar, participants must be well versed in the use of multifamily TREAT (e.g. prior attendance to an in-person training, webinar, etc.).

This webinar does not include the full creation of a model, but rather focuses on troublesome aspects of energy modeling, and the specific issues of the attendees. A computer with microphone and speakers, or a computer in conjunction with a phone are required for participation.  Participants are eligible for 2.0 BPI ceus.

These “Advanced TREAT Multifamily Modeling” topics are covered in this 2 hour course:

  • Identify and understand advanced inputs for more flexible modeling
  • Personalize TREAT with custom defaults for faster and more convenient modeling
  • Understanding details of multifamily domestic hot water systems.
  • Generating and understanding reports in TREAT – knowing which reports will help you troubleshoot your model
  • Creating and understanding improvements and packages
  • Understanding best practices for utility data uploads
  • Opportunity to ask advanced modeling questions to understand issues in your current models

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Oct
16
Thu
2014
Sneak Peek – Open Studio @ Free Webinar
Oct 16 @ 12:30 pm – 1:00 pm

Register

NREL’s OpenStudio platform for EnergyPlus is changing the way building professionals approach energy modeling. Join us for a free 30-minute free overview of our Open Studio Training, and how it can benefit you and your business. Our instructor, Chris Balbach,  will lead the webinar and will answer any questions you may have about the training.

About the Trainer

Chris Balbach

VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:

PE, CEM, CVMP, BESA

Oct
21
Tue
2014
TREAT Multifamily 16-Hour Online Training @ Online Training
Oct 21 @ 1:00 pm – Oct 24 @ 5:00 pm

Register

8 CEUsfor this class

Dates: October 21-24th
Times: 1pm-5pm

Course Description

PSD’s 16-hour comprehensive TREAT training, conveniently delivered through four four-hour live, online webinars, will expose attendees to time efficient modeling procedures and methods. Attendees will learn how to leverage the TREAT modeling software to model and evaluate typical improvement workscopes used by weatherization programs, construct energy models of multifamily buildings from ‘scratch’, and apply templates to streamline the evaluation of standardized improvements.

The course is comprehensive and will cover apartment sampling, energy model calibration, modeling strategies, data entry problem solving, billing analysis, quantifying interactions between systems, predicted energy savings, and calculating SIRs. Students will be given homework assignment each day so that they can practice building TREAT models.

Course Objectives

  • Learn how to use the “Multifamily Existing Building Improvement-Driven Modeling Process” for improving energy efficiency in multifamily buildings using TREAT
  • Integrate TREAT into the auditing process to improve overall project efficiency and productivity.
  • Build a TREAT model with an appropriate level of detail to generate savings and workscope reports
  • Demonstrate proper use of TREAT’s billing analysis tools to import a building’s actual energy bills and analyze baseline energy signatures and historical energy performance patterns
  • Incorporate ‘non-energy’ benefits (i.e. health and safety measures) into the TREAT model
  • Follow recommended procedure for ‘true-up’ of TREAT model
  • Create and analyze the investment potential of individual ECMs and interacting sets of improvements
  • Produce appropriate TREAT improvements reporting for weatherization projects
  • Use TREAT to determine actual energy savings vs. predicted energy savings

 

Modeling is now a BPI requirement. Upon completion you will be eligible to receive up to 8 continuing education units (CEUs).
Oct
30
Thu
2014
Free Webinar: Sneak Peek – Fundamentals of Measurement & Verification @ Free Webinar
Oct 30 @ 12:30 pm – 1:00 pm

Register

Thursday, October 30, 2014 12:30 PM – 1:00 PM EDT

Interest in M&V related skills as they apply to the built environment continue to grow, by building owners, practitioners, financiers and other stakeholders in the energy efficiency sector. Our Fundamentals of Measurement & Verification training provides an understanding of procedures and workflows for developing and executing M&V plans.

Please join us for a free 30-minute free overview of our Fundamentals of M&V training, and how it can benefit you and your business.

Nov
5
Wed
2014
OpenStudio 2-day Training @ Syracuse, NY - Syracuse Center of Excellence (COE)
Nov 5 @ 9:00 am – Nov 6 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date: November 5-6

Time: 9am-5pm

Course Description

This 2-day hands-on course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

Registration includes all workshop material & continental breakfast and lunch daily.


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies

Course Agenda

Day 1

Use the OS SketchUp Plugin to:

  • Load templates for providing default values
  • Import idf or gbxml files generated by other tools
  • Use Sketchup tools to create building spaces (form and fabric)
  • Rapidly assign space load definitions
  • Rapidly assign properties using construction and schedule sets at different hierarchies
  • Configure spaces for daylight controls
  • Create external shading objects/surfaces
  • Collect/configure spaces into Thermal Zones and assign thermostats

Use the OpenStudio Application to:

  • Use BCL to retrieve Configure Zonal Central HVAC systems and controls
  • Configure Central HVAC systems and controls
  • Configure Service Water systems and controls
  • Add BCL measures to extend baseline model
  • Incorporate utility bills for model/billing comparison
  • Addition of measures to provide calibration roadmap

Day 2

Use Results Viewer to:

  • Graphically examine detailed mode output
  • Export detailed model output for further post-processing

Use Parametric Analysis Tool to:

  • Select and configure OS measures from the NREL BCL
  • Define simulation study by configuring Design Alternatives
  • Use the Amazon EC2 resource to execute the simulation study
  • Examine detailed model output

Special Topics

  • How to create a “measure” for use in OpenStudio
  • OpenStudio Measure
  • EnergyPlus Measure
  • Reporting Measure
  • How to share measures to the BCL
  • How to manage large simulation studies
Nov
12
Wed
2014
Fundamentals of Measurements and Verification @ New York, NY - Green Light NY, Suite 609
Nov 12 @ 9:00 am – Nov 14 @ 5:00 pm

Register

Credits

20 PDHs for this class

2 CEUsfor this class

Course Description

Presented by PSD and the Association of Energy Engineers (AEE) this comprehensive training course is designed to provide the necessary training for those seeking to achieve the status of Certified Measurement and Verification Professional (CMVP). More details about the CMVP designation can be found at www.aeecenter.org/certification/CMVP.

Proven energy savings are now playing a significant role in financing energy management programs, whether through energy performance contracts or through emission trades under schemes such as the clean development mechanism of the UNFCCC. While interest in savings data is growing, the state of the art in determining savings has also been rapidly evolving. This seminar will examine current best practices for determining and documenting savings, specifically reviewing the current edition of the International Performance Measurement & Verification Protocol (IPMVP).

Attendees will learn the process of designing a proper M&V program for their projects, including cost/accuracy tradeoffs, baseline adjustments, interactive effects, types of savings, maintaining transparency, and analysis methods. Examples of specific techniques will be presented, along with common pitfalls which can result in unreliable savings reports. These techniques are central to management under the new ISO 50001 standard for Energy Management Systems. Class time will include problem solving and debate.

Through participating in a “fundamentals” course, persons experienced in M&V will also appreciate the assembly of all of the issues, the debates, and engagement at their own level with expert instructors.  The CMVP exam will be administered at the close of instruction on day three of each seminar to those who have qualified in advance to sit for the exam by submitting a completed CMVP application and fee. Advance reading of IPMVP Volume I (available at www.evo-world.org) would be useful reading before the exam, though not required.

Accreditation: 2 AIA CEUs, 20  PDHs

Registration includes all workshop material & continental breakfast and lunch daily.


Course Outline

Reasons for M&V
• Types of uses for M&V
• M&V’s role in financing

Current M&V Protocols
• Relationship of IPMVP and other guidelines

IPMVP
• Its evolution
• Overview of IPMVP Options A, B, C & D

Developing an M&V Plan
• Principles of M&V
• Scope of energy to be monitored
• Differences between M&V for industry and for buildings
• “Cost avoidance” or “normalized savings?”
• Choosing independent variables for routine baseline adjustments
• Sources of data
• M&V budgets
• Selecting the baseline period and data
• Measurement systems design, commissioning & maintenance
• Baseline analysis methods
• Various forms of savings computation
• Valuing savings
• Routine procedures and QC
• Managing the uncertainty created by sampling, metering, modeling and unknowns
• Bias and rounding
• Reporting procedures
• Coordinating with other purposes
• When to do the M&V Plan

Current Issues in M&V
• Coping with missing data
• Cost/uncertainty tradeoffs
• Monitoring IAQ

Baseline Adjustment
• Why they are necessary
• Who does what, when

Key Elements of Success: Theory & Examples of IPMVP Options 

• Details of IPMVP methods
• Retrofit isolation (IPMVP Options A & B): Instrumentation issues
• Whole facility (IPMVP Option C): Utility billing issues
• Calibrated simulation (IPVMP Option D): Simulation issues
• Lessons from tough experience

Selecting Options: Which One Is Best Suited For My Project?

Adherence with IPMVP

Jan
15
Thu
2015
Sneak Peek – Open Studio @ Free Webinar
Jan 15 @ 12:30 pm – 1:00 pm

Register

NREL’s OpenStudio platform for EnergyPlus is changing the way building professionals approach energy modeling. Join us for a free 30-minute free overview of our Open Studio Training, and how it can benefit you and your business. Our instructor, Chris Balbach,  will lead the webinar and will answer any questions you may have about the training.

About the Trainer

Chris Balbach

VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:

PE, CEM, CVMP, BESA

Feb
12
Thu
2015
Free Webinar: Sneak Peek – TREAT Software @ Free Webinar
Feb 12 @ 12:30 pm – 1:00 pm

Register

TREAT is our award-winning energy audit software for comprehensive energy analysis and building modeling.
A winner of the prestigious R&D 100 award, TREAT is the only energy audit software approved by the DOE for all residential housing types – including multifamily. TREAT is market tested, with thousands of users enjoying accurate results for over a decade of supporting whole house energy audits.

Learn how training can help you to get the most from TREAT.  Our trainer will be available to answer your questions.

The webinar is free. Please register in advance and we will send you a link.

Feb
18
Wed
2015
Introduction to TREAT Multifamily Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Feb 18 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: February 18th, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will walk users through each screen of the TREAT user interface. Core energy modeling concepts will be introduced and discussed.  Participants will learn how to understand how changes made to the model affect the estimated energy consumption.

A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.  Participants are eligible for 2.0 BPI CEUs.

 

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Feb
23
Mon
2015
TREAT Multifamily Comprehensive Workshop (16-hour Online 8 CEU) @ Online Training
Feb 23 @ 12:30 pm – Feb 26 @ 4:30 pm

Register

8 CEUsfor this class

Dates: February 23-26th
Times: 12:30pm-4:30pm

Course Description

PSD’s 16-hour comprehensive TREAT training, conveniently delivered through four four-hour live, online webinars, will expose attendees to time efficient modeling procedures and methods. Attendees will learn how to leverage the TREAT modeling software to model and evaluate typical improvement workscopes used by weatherization programs, construct energy models of multifamily buildings from ‘scratch’, and apply templates to streamline the evaluation of standardized improvements.

The course is comprehensive and will cover apartment sampling, energy model calibration, modeling strategies, data entry problem solving, billing analysis, quantifying interactions between systems, predicted energy savings, and calculating SIRs. Students will be given homework assignment each day so that they can practice building TREAT models.

Course Objectives

  • Learn how to use the “Multifamily Existing Building Improvement-Driven Modeling Process” for improving energy efficiency in multifamily buildings using TREAT
  • Integrate TREAT into the auditing process to improve overall project efficiency and productivity.
  • Build a TREAT model with an appropriate level of detail to generate savings and workscope reports
  • Demonstrate proper use of TREAT’s billing analysis tools to import a building’s actual energy bills and analyze baseline energy signatures and historical energy performance patterns
  • Incorporate ‘non-energy’ benefits (i.e. health and safety measures) into the TREAT model
  • Follow recommended procedure for ‘true-up’ of TREAT model
  • Create and analyze the investment potential of individual ECMs and interacting sets of improvements
  • Produce appropriate TREAT improvements reporting for weatherization projects
  • Use TREAT to determine actual energy savings vs. predicted energy savings

 

Modeling is now a BPI requirement. Upon completion you will be eligible to receive up to 8 continuing education units (CEUs).
Mar
18
Wed
2015
TREAT Multifamily Mastery Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Mar 18 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: March 18th, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will cover advanced TREAT modeling using the multifamily version. To attend this webinar, participants must be well versed in the use of multifamily TREAT (e.g. prior attendance to an in-person training, webinar, etc.).

This webinar does not include the full creation of a model, but rather focuses on troublesome aspects of energy modeling, and the specific issues of the attendees. A computer with microphone and speakers, or a computer in conjunction with a phone are required for participation.  Participants are eligible for 2.0 BPI ceus.

These “Advanced TREAT Multifamily Modeling” topics are covered in this 2 hour course:

  • Identify and understand advanced inputs for more flexible modeling
  • Personalize TREAT with custom defaults for faster and more convenient modeling
  • Understanding details of multifamily domestic hot water systems.
  • Generating and understanding reports in TREAT – knowing which reports will help you troubleshoot your model
  • Creating and understanding improvements and packages
  • Understanding best practices for utility data uploads
  • Opportunity to ask advanced modeling questions to understand issues in your current models

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Apr
8
Wed
2015
TREAT Multifamily Mid Rise Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Apr 8 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: April 8th, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will cover high rise modeling using TREAT multifamily software. A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.

Topics included:

  • Strategic creation of spaces and surfaces
  • Transformation of HVAC audit data into TREAT inputs
  • Utility Bill upload, analysis and True-up
  • DHW inputs
  • Infiltration
  • Fans
  • Lights
  • Appliances
  • Improvements
  • Packages

To benefit the most from this webinar, participants should have prior experience modeling TREAT software, or have attended the introductory webinar.

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Apr
20
Mon
2015
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Apr 20 @ 1:00 pm – Apr 23 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • April 20-23, 2015 (1-5pm)

Course Description

This 4-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Apr
30
Thu
2015
Free Webinar: Sneak Peek – Building Re-Tuning @ Free Webinar
Apr 30 @ 12:30 pm – 1:00 pm

Register

Thursday, April 30, 2015 12:30 PM – 1:00 PM EDT

Much of the energy used in commercial buildings is wasted because of improper operations. Many buildings are not properly commissioned, operated, or maintained, which leads to inefficient operation and reduced lifetimes of equipment.

This course is based on the publicly available curriculum developed by the Pacific Northwest National Laboratory and will teach you techniques and strategies that can be utilized to maintain building systems, make them more efficient, and target areas for improvement.

Sneak Peek – Open Studio @ Free Webinar
Apr 30 @ 1:00 pm – 1:30 pm

Register

NREL’s OpenStudio platform for EnergyPlus is changing the way building professionals approach energy modeling. Join us for a free 30-minute free overview of our Open Studio Training, and how it can benefit you and your business. Our instructor, Chris Balbach,  will lead the webinar and will answer any questions you may have about the training.

About the Trainer

Chris Balbach

VP of Research and Development
Performance Systems Development

Chris has over 15 years of experience using energy modeling and analysis software to analyze the investment potential of existing buildings, with a focus on energy efficiency, building durability, and occupant health and safety. He is an active member of the IBPSA-USA Board of Directors, chairs the AEE BESA (Building Energy Simulation Analyst) certification board, and is a voting member of the ASHRAE SPC 211 (Standard for Commercial Building Energy Audits).

Certifications:

PE, CEM, CVMP, BESA

Jun
9
Tue
2015
Fundamentals of Measurements and Verification (20 PDH + 2 CEU) @ Albany, NY
Jun 9 @ 8:00 am – Jun 11 @ 4:00 pm

Register

Credits

20 PDHs for this class

2 CEUsfor this class

Date and Times:

  • June 9, 2015 (8am-4pm)
  • June 10, 2015 (8am-4pm)
  • June 11, 2015 (8am-noon)

Course Description

Presented by PSD and the Association of Energy Engineers (AEE) this comprehensive training course is designed to provide the necessary training for those seeking to achieve the status of Certified Measurement and Verification Professional (CMVP). More details about the CMVP designation can be found at www.aeecenter.org/certification/CMVP.

Proven energy savings are now playing a significant role in financing energy management programs, whether through energy performance contracts or through emission trades under schemes such as the clean development mechanism of the UNFCCC. While interest in savings data is growing, the state of the art in determining savings has also been rapidly evolving. This seminar will examine current best practices for determining and documenting savings, specifically reviewing the current edition of the International Performance Measurement & Verification Protocol (IPMVP).

Attendees will learn the process of designing a proper M&V program for their projects, including cost/accuracy tradeoffs, baseline adjustments, interactive effects, types of savings, maintaining transparency, and analysis methods. Examples of specific techniques will be presented, along with common pitfalls which can result in unreliable savings reports. These techniques are central to management under the new ISO 50001 standard for Energy Management Systems. Class time will include problem solving and debate.

Through participating in a “fundamentals” course, persons experienced in M&V will also appreciate the assembly of all of the issues, the debates, and engagement at their own level with expert instructors.  The CMVP exam will be administered at the close of instruction on day three of each seminar to those who have qualified in advance to sit for the exam by submitting a completed CMVP application and fee. Advance reading of IPMVP Volume I (available at www.evo-world.org) would be useful reading before the exam, though not required.

Accreditation: 2 AIA CEUs, 20  PDHs

Registration includes all workshop material & continental breakfast and lunch daily.


Course Outline

Reasons for M&V
• Types of uses for M&V
• M&V’s role in financing

Current M&V Protocols
• Relationship of IPMVP and other guidelines

IPMVP
• Its evolution
• Overview of IPMVP Options A, B, C & D

Developing an M&V Plan
• Principles of M&V
• Scope of energy to be monitored
• Differences between M&V for industry and for buildings
• “Cost avoidance” or “normalized savings?”
• Choosing independent variables for routine baseline adjustments
• Sources of data
• M&V budgets
• Selecting the baseline period and data
• Measurement systems design, commissioning & maintenance
• Baseline analysis methods
• Various forms of savings computation
• Valuing savings
• Routine procedures and QC
• Managing the uncertainty created by sampling, metering, modeling and unknowns
• Bias and rounding
• Reporting procedures
• Coordinating with other purposes
• When to do the M&V Plan

Current Issues in M&V
• Coping with missing data
• Cost/uncertainty tradeoffs
• Monitoring IAQ

Baseline Adjustment
• Why they are necessary
• Who does what, when

Key Elements of Success: Theory & Examples of IPMVP Options 

• Details of IPMVP methods
• Retrofit isolation (IPMVP Options A & B): Instrumentation issues
• Whole facility (IPMVP Option C): Utility billing issues
• Calibrated simulation (IPVMP Option D): Simulation issues
• Lessons from tough experience

Selecting Options: Which One Is Best Suited For My Project?

Adherence with IPMVP

Jun
10
Wed
2015
TREAT Multifamily High Rise Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Jun 10 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: June 10th, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

During this two hour webinar participants will create a TREAT model of a high-rise building step by step with the instructor. A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.

Topics included:

  • Strategic creation of spaces and surfaces
  • Transformation of HVAC audit data into TREAT inputs
  • Utility Bill upload, analysis and True-up
  • DHW inputs
  • Infiltration
  • Fans
  • Lights
  • Appliances
  • Improvements
  • Packages

To benefit the most from this webinar, participants should have prior experience modeling TREAT software, or have attended the introductory webinar.

 

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Jul
21
Tue
2015
OpenStudio 2-day Training (14 PDH) @ Chicago, IL - PositivEnergy Practice
Jul 21 @ 9:00 am – Jul 22 @ 5:30 pm

Date & Time:

  • July 21, 2015 (9 am – 5:30 pm)
  • July 22, 2015 (9 am – 5:30 pm)

Course Description 

This 2-day hands-on course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

Register

Credits

14 PDHs for this class

Registration includes all workshop material & continental breakfast and lunch daily.


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies

Course Agenda 

Day 1

Use the OS SketchUp Plugin to:

  • Load templates for providing default values
  • Import idf or gbxml files generated by other tools
  • Use Sketchup tools to create building spaces (form and fabric)
  • Rapidly assign space load definitions
  • Rapidly assign properties using construction and schedule sets at different hierarchies
  • Configure spaces for daylight controls
  • Create external shading objects/surfaces
  • Collect/configure spaces into Thermal Zones and assign thermostats

Use the OpenStudio Application to:

  • Use BCL to retrieve Configure Zonal Central HVAC systems and controls
  • Configure Central HVAC systems and controls
  • Configure Service Water systems and controls
  • Add BCL measures to extend baseline model
  • Incorporate utility bills for model/billing comparison
  • Addition of measures to provide calibration roadmap

Day 2

Use Results Viewer to:

  • Graphically examine detailed mode output
  • Export detailed model output for further post-processing

Use Parametric Analysis Tool to:

  • Select and configure OS measures from the NREL BCL
  • Define simulation study by configuring Design Alternatives
  • Use the Amazon EC2 resource to execute the simulation study
  • Examine detailed model output

Special Topics

  • How to create a “measure” for use in OpenStudio
  • OpenStudio Measure
  • EnergyPlus Measure
  • Reporting Measure
  • How to share measures to the BCL
  • How to manage large simulation studies
Aug
25
Tue
2015
TREAT Multifamily Mastery Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Aug 25 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: August 12th, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will cover advanced TREAT modeling using the multifamily version. To attend this webinar, participants must be well versed in the use of multifamily TREAT (e.g. prior attendance to an in-person training, webinar, etc.).

This webinar does not include the full creation of a model, but rather focuses on troublesome aspects of energy modeling, and the specific issues of the attendees. A computer with microphone and speakers, or a computer in conjunction with a phone are required for participation.  Participants are eligible for 2.0 BPI ceus.

These “Advanced TREAT Multifamily Modeling” topics are covered in this 2 hour course:

  • Identify and understand advanced inputs for more flexible modeling
  • Personalize TREAT with custom defaults for faster and more convenient modeling
  • Understanding details of multifamily domestic hot water systems.
  • Generating and understanding reports in TREAT – knowing which reports will help you troubleshoot your model
  • Creating and understanding improvements and packages
  • Understanding best practices for utility data uploads
  • Opportunity to ask advanced modeling questions to understand issues in your current models

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Sep
15
Tue
2015
TREAT Multifamily Comprehensive Workshop (16-hour Online 8 CEU) @ Online Training
Sep 15 @ 12:30 pm – Sep 18 @ 4:30 pm

Register

8 CEUsfor this class

Dates & Times: September 15-18th, 2015

  • Tuesday Sept. 15th (12:30-4:30pm)
  • Wednesday Sept. 16th (1:30-5:30pm)
  • Thursday Sept. 17th (12:00-4:00pm)
  • Friday Sept. 18th (11:30-3:30pm)

Course Description

PSD’s 16-hour comprehensive TREAT training, conveniently delivered through four four-hour live, online webinars, will expose attendees to time efficient modeling procedures and methods. Attendees will learn how to leverage the TREAT modeling software to model and evaluate typical improvement workscopes used by weatherization programs, construct energy models of multifamily buildings from ‘scratch’, and apply templates to streamline the evaluation of standardized improvements.

The course is comprehensive and will cover apartment sampling, energy model calibration, modeling strategies, data entry problem solving, billing analysis, quantifying interactions between systems, predicted energy savings, and calculating SIRs. Students will be given homework assignment each day so that they can practice building TREAT models.

Course Objectives

  • Learn how to use the “Multifamily Existing Building Improvement-Driven Modeling Process” for improving energy efficiency in multifamily buildings using TREAT
  • Integrate TREAT into the auditing process to improve overall project efficiency and productivity.
  • Build a TREAT model with an appropriate level of detail to generate savings and workscope reports
  • Demonstrate proper use of TREAT’s billing analysis tools to import a building’s actual energy bills and analyze baseline energy signatures and historical energy performance patterns
  • Incorporate ‘non-energy’ benefits (i.e. health and safety measures) into the TREAT model
  • Follow recommended procedure for ‘true-up’ of TREAT model
  • Create and analyze the investment potential of individual ECMs and interacting sets of improvements
  • Produce appropriate TREAT improvements reporting for weatherization projects
  • Use TREAT to determine actual energy savings vs. predicted energy savings
Modeling is now a BPI requirement. Upon completion you will be eligible to receive up to 8 continuing education units (CEUs).
Oct
20
Tue
2015
Fundamentals of Measurements and Verification (20 PDH + 2 CEU) @ New York, NY - Building Energy Exchange, Suite 609
Oct 20 @ 9:00 am – Oct 22 @ 5:00 pm

Register

Credits

20 PDHs for this class

2 CEUsfor this class

Date and Times:

  • October 20, 2015 (8am-4pm)
  • October 21, 2015 (8am-4pm)
  • October 22, 2015 (8am-noon)

Course Description

Presented by PSD and the Association of Energy Engineers (AEE) this comprehensive training course is designed to provide the necessary training for those seeking to achieve the status of Certified Measurement and Verification Professional (CMVP). More details about the CMVP designation can be found at www.aeecenter.org/certification/CMVP.

Proven energy savings are now playing a significant role in financing energy management programs, whether through energy performance contracts or through emission trades under schemes such as the clean development mechanism of the UNFCCC. While interest in savings data is growing, the state of the art in determining savings has also been rapidly evolving. This seminar will examine current best practices for determining and documenting savings, specifically reviewing the current edition of the International Performance Measurement & Verification Protocol (IPMVP).

Attendees will learn the process of designing a proper M&V program for their projects, including cost/accuracy tradeoffs, baseline adjustments, interactive effects, types of savings, maintaining transparency, and analysis methods. Examples of specific techniques will be presented, along with common pitfalls which can result in unreliable savings reports. These techniques are central to management under the new ISO 50001 standard for Energy Management Systems. Class time will include problem solving and debate.

Through participating in a “fundamentals” course, persons experienced in M&V will also appreciate the assembly of all of the issues, the debates, and engagement at their own level with expert instructors.  The CMVP exam will be administered at the close of instruction on day three of each seminar to those who have qualified in advance to sit for the exam by submitting a completed CMVP application and fee. Advance reading of IPMVP Volume I (available at www.evo-world.org) would be useful reading before the exam, though not required.

Accreditation: 2 AIA CEUs, 20  PDHs

Registration includes all workshop material & continental breakfast and lunch daily.


Course Outline

Reasons for M&V
• Types of uses for M&V
• M&V’s role in financing

Current M&V Protocols
• Relationship of IPMVP and other guidelines

IPMVP
• Its evolution
• Overview of IPMVP Options A, B, C & D

Developing an M&V Plan
• Principles of M&V
• Scope of energy to be monitored
• Differences between M&V for industry and for buildings
• “Cost avoidance” or “normalized savings?”
• Choosing independent variables for routine baseline adjustments
• Sources of data
• M&V budgets
• Selecting the baseline period and data
• Measurement systems design, commissioning & maintenance
• Baseline analysis methods
• Various forms of savings computation
• Valuing savings
• Routine procedures and QC
• Managing the uncertainty created by sampling, metering, modeling and unknowns
• Bias and rounding
• Reporting procedures
• Coordinating with other purposes
• When to do the M&V Plan

Current Issues in M&V
• Coping with missing data
• Cost/uncertainty tradeoffs
• Monitoring IAQ

Baseline Adjustment
• Why they are necessary
• Who does what, when

Key Elements of Success: Theory & Examples of IPMVP Options 

• Details of IPMVP methods
• Retrofit isolation (IPMVP Options A & B): Instrumentation issues
• Whole facility (IPMVP Option C): Utility billing issues
• Calibrated simulation (IPVMP Option D): Simulation issues
• Lessons from tough experience

Selecting Options: Which One Is Best Suited For My Project?

Adherence with IPMVP

Oct
27
Tue
2015
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Oct 27 @ 1:00 pm – Oct 30 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • October 27-30, 2015 (1-5pm)

Course Description

This 4-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Oct
29
Thu
2015
Introduction to TREAT Multifamily Workshop (2 CEU) @ Online Training - TREAT Masters Workshop
Oct 29 @ 1:00 pm – 3:00 pm

Register

2 CEUsfor this class

Date: October 21st, 2015: 1-3pm (EST)

Price: $95 / $47.50 (NYSERDA Discount)

This two-hour webinar will walk users through each screen of the TREAT user interface. Core energy modeling concepts will be introduced and discussed.  Participants will learn how to understand how changes made to the model affect the estimated energy consumption.

A computer with microphone and speakers, or a computer in conjunction with a phone are recommended for participation.  Participants are eligible for 2.0 BPI CEUs.

 

 

Upon completion you will be eligible to receive 2 continuing education units (CEUs).

 

Dec
8
Tue
2015
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Dec 8 @ 1:00 pm – Dec 11 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • December 8-11, 2015 (1-5pm)

Course Description

This 4-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Mar
21
Mon
2016
OpenStudio Measure Development 4-day Training (Online 16-hours) @ Online
Mar 21 @ 1:00 pm – Mar 24 @ 5:00 pm

Register

Date and Times:

  • March 21-24, 2016 (1-5pm EST)

Course Description

This advanced course focuses on using Ruby to code new OpenStudio measures and is designed for users already familiar with OpenStudio. Having taken our introduction to OpenStudio course is recommended. If you have not taken this course we may contact you to confirm your basic proficiency with OpenStudio. This class focuses on advanced use of the OpenStudio toolset.

This is an advanced course and requires familiarity with the basics of OpenStudio.

Course Overview

  1. A brief introduction about coding & ruby language.
  2. Introduction of OpenStudio’s API (application program interface)
  3. Openstudio’s object & how to integrate them with API
  4. Access to building component library from NREL.
  5. Introduction to written measures.
  6. Demonstration of OpenStudio scripting.
  7. Deep interrogation of ruby language for OS measure writing which includes introduction of ruby objects & scripts.
May
24
Tue
2016
Sold Out – Introduction to OpenStudio for New Construction Modeling 4-day Training (Online 14 PDH) @ Online - Sold Out
May 24 @ 1:00 pm – May 27 @ 5:00 pm

Register – Sold Out

Credits

14 PDHs for this class

Sold Out

Date and Times:

  • May 24-27, 2016 (1-5pm EST)
  • Optional 2- hour SketchUp Training Available May 23 for an addition $150. Many past students have asked to have this option added. Hosted from 1 to 3 pm EST.

Course Description

This 4-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Jul
28
Thu
2016
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Jul 28 @ 1:00 pm – Aug 3 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • July 28,29 and August 1,2,3 2016 (1-5pm EST)
  • July 27 – Optional SketchUp Training for an additional $150 (1-3pm EST)

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Aug
8
Mon
2016
Show Me the Money – Using OpenStudio Frameworks to perform IPMVP Option D Adherent Analysis @ SimBuild 2016 Preconference Session
Aug 8 @ 1:00 pm – 5:00 pm

Sign up for the course on the ASHRAE Website

Date and Times:

  • Preconference session Monday August 8 from 1 to 5pm

Course Description

As interest in performance verification and model validation continues to grow, Energy Modelers should consider familiarizing themselves with new IMPVP Option D approaches. IPMVP represents a set of internationally accepted protocols for quantifying project related savings, including the Option D approach. Calibrated energy models form the foundation of all IPMVP Option D savings estimations. Option D activities involve generating a calibrated ‘as operating’ model, and the subsequent replacement of components of the calibrated model to estimate project savings.  In addition, Option D is the only IPMVP option which can be accomplished post facto. This powerful attribute allows IPMVP adherent savings to be determined for nearly ANY energy efficiency project. Until recently, cost-effective methods for quantifying the accuracy of model calibration efforts have been difficult for practitioners to develop and/or execute, preventing Option D from being applied to projects in any scalable manner.  However, recent advances in the OpenStudio suite of tools provide new ways for users to interact with a calibration framework that can be used for either new construction or retrofit projects – including incorporating uncertainty analysis. Course attendees will be exposed to this framework, allowing them to explore the uncertainty of input parameters and discover sometimes unexpected solutions that might lie within a large parameter space. Students will use OpenStudio tools to configure an analysis scenario involving calibration, apply parameter sensitivity analysis to determine parameters of influence, and execute a calibration exercise where solutions are discovered.  The course will be jointly taught by PSD’s Chris Balbach and NREL’s Brian Ball

Dec
13
Tue
2016
Introduction to the Building Energy Asset Score Tool @ Online Training
Dec 13 @ 2:00 pm – 3:00 pm

Register

Learning Objective: Students will be introduced to the Commercial Building Asset Score Tool and develop an understanding of the basics for navigating within the tool and gain insight into some best practices for using the tool, leveraging the community of users, and getting help with models.

  • Welcome and introduction to speaker (5 minutes)
  • Brief technical overview of the tool. (15 minutes)
    • Difference between AS and PM
    • Point to a technical review resource
  • Quickly generate an asset score full rating and review report. (20 minutes)
  • Review of available help resources and forum (10 minutes)
  • Comments, Questions, and Concerns (10 minutes)

This is part one of a two part training. The next training offered will be called Advanced Asset Score Modeling. To visit the DOE Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

Asset Score image

Feb
9
Thu
2017
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Feb 9 @ 1:00 pm – Feb 15 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • (Online 5-days) February 9-10 and 13-15, 201 (1-5pm EST)
  • (Optional 2-Hour) SketchUp Training: February 8, 2017 (1-3pm EST), +$150.00

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Feb 9 @ 1:00 pm – Feb 15 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • (Online 5-days) February 9-10 and 13-15, 201 (1-5pm EST)
  • (Optional 2-Hour) SketchUp Training: February 8, 2017 (1-3pm EST), +$150.00

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Feb
28
Tue
2017
ADVANCE ASSET SCORE MODELING (FREE) @ Online
Feb 28 @ 1:00 pm – 2:00 pm

Register FREE

asset-score-logos

Learning Objective:

Students will focus on how the Building Energy Asset Score Tool can accommodate them in complex real-world situations and deep-dive into complex scoring examples.

  1. Welcome and introduction to speaker.
  2. Advanced HVAC inputs using Asset Score.
  3. Constructing complex building geometries.
  4. Importing data from EPA Portfolio Manager.
  5. Exporting completed Asset Score project to an OpenStudio Model.
  6. Questions and suggestions for future advanced course topics

To visit the DOE Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

Mar
6
Mon
2017
TREAT Multifamily 16-Hour Online Training @ Online Training
Mar 6 @ 1:00 pm – Mar 9 @ 5:00 pm

Register

Dates: March 6th-9th
Times: 1pm-5pm

 

Course Description

PSD’s 16-hour comprehensive TREAT training, conveniently delivered through four four-hour live, online webinars, will expose attendees to time efficient modeling procedures and methods. Attendees will learn how to leverage the TREAT modeling software to model and evaluate typical improvement workscopes used by weatherization programs, construct energy models of multifamily buildings from ‘scratch’, and apply templates to streamline the evaluation of standardized improvements.

The course is comprehensive and will cover apartment sampling, energy model calibration, modeling strategies, data entry problem solving, billing analysis, quantifying interactions between systems, predicted energy savings, and calculating SIRs. Students will be given homework assignment each day so that they can practice building TREAT models.

Course Objectives

  • Learn how to use the “Multifamily Existing Building Improvement-Driven Modeling Process” for improving energy efficiency in multifamily buildings using TREAT
  • Integrate TREAT into the auditing process to improve overall project efficiency and productivity.
  • Build a TREAT model with an appropriate level of detail to generate savings and workscope reports
  • Demonstrate proper use of TREAT’s billing analysis tools to import a building’s actual energy bills and analyze baseline energy signatures and historical energy performance patterns
  • Incorporate ‘non-energy’ benefits (i.e. health and safety measures) into the TREAT model
  • Follow recommended procedure for ‘true-up’ of TREAT model
  • Create and analyze the investment potential of individual ECMs and interacting sets of improvements
  • Produce appropriate TREAT improvements reporting for weatherization projects
  • Use TREAT to determine actual energy savings vs. predicted energy savings
Modeling is now a BPI requirement. Upon completion you will be eligible to receive up to 8 continuing education units (CEUs).
Mar
15
Wed
2017
Building Science of Commercial Buildings @ Philadelphia - Delaware Valley Green Building Council
Mar 15 @ 8:00 am – 12:00 pm

Register

Overview

The purpose of this course is to introduce building staff and management to the primary systems in commercial buildings that use energy.  This course will explain how the HVAC, lighting, and building envelope operate, interact, and use energy.  The attendees will learn examples of and good practices for energy efficiency opportunities, overview and tools for making sound economic decisions related to energy efficiency upgrades, and understand when to use nationally recognized energy efficiency tools and their expected level of effort and cost.

Intended Audience

  • Onsite operations and maintenance (O&M) staff looking to increase their knowledge of building science and how to identify energy savings opportunities
  • Building management seeking to become more familiar with how their buildings operate, which variables have the biggest influence on energy costs, and how and when to make energy efficiency upgrades that meet their economic criteria

Scope

  • High-level descriptions of and understandings of the following topics:
    • Building envelope
    • HVAC systems
    • Lighting systems
    • Plug load management
    • Building automation systems (BAS)
    • Building metering with tariff analysis
  • Specific examples, rules-of-thumb, and energy efficiency opportunities for each of the systems described above. These will focus on energy end-use strategies to minimize energy costs, energy demand charges, and overall energy usage.
  • Overview and tools for economic decision making process to include local efficiency incentives available and the application process.
  • Demonstration of the importance and use of nationally recognized energy efficiency tools. Understand when to use each of the tools and the expected level of effort and cost for each.
    • EPA Portfolio Manager
    • DOE Energy Asset Score
    • LEED-EBOM process

Learning Objectives

  1. Have a general knowledge of the primary energy end-use systems of commercial buildings, and how they operate.
  2. Know at least two energy conservation measures (ECMs) for each primary system
  3. Know which energy efficiency screening/documentation tool is best for a given energy upgrade scenario
Building Operator Training and Re-tuning @ Philadelphia - Delaware Valley Green Building Council
Mar 15 @ 1:00 pm – 5:00 pm

Register

Overview

The purpose of this course is to help operations and maintenance (O&M) staff learn how to operate buildings more efficiently, reduce operating cost, and provide energy savings. This course will provide prescriptive best practices for maintaining good operations, and an overview of the re-tuning process using building automation system (BAS) trend data.  Attendees will learn how to look for and optimize the control strategy for many of the common energy saving opportunities such as occupancy scheduling, temperature and static pressure control, and economizer function.  Attendees will also learn basic principles of preventative maintenance, electrical diagnostics, building commissioning, and demand response.

Intended Audience

  • Onsite O&M staff responsible for day-to-day building operations
  • O&M staff management looking to integrate the re-tuning process into their O&M procedures
  • Offsite contractors (retro-commissioning agents or control vendors) hired to improve a building’s energy efficiency

Prerequisite Knowledge

  • Basic understanding of commercial building systems (e.g. air handling units, VAV boxes, boilers, chillers)
  • Familiar with basic functions of building automation systems (BAS)

Scope

  • Prescriptive best practices for good building operations
  • Overview of the re-tuning process using BAS data
  • Actionable guidance on how to look for and optimize the control strategy of each of the following re-tuning measures:
    • Occupancy Scheduling
    • Discharge-Air Temperature Control
    • Discharge- Air Static Pressure Control
    • Air-Handling Unit Heating and Cooling
    • Air- Handling Unit Outside/Fresh Air makeup
    • Air-Handling Unit Economizer Operation
    • Zone Conditioning
    • Central Plant Optimization
  • Basic principles of the following topics and when they are most applicable:
    • Preventative Maintenance and Troubleshooting
    • Electrical and Mechanical Diagnostics
    • Building Commissioning
    • Demand Response Techniques

Learning Objectives

  1. Be able to list five low/no-cost prescriptive O&M measures that may apply to your building
  2. Be able to describe the basics of the re-tuning process, and some of the benefits
  3. List at least three examples of poor operations that can be found through the re-tuning process
Apr
18
Tue
2017
Building Science of Commercial Buildings @ Philadelphia - Delaware Valley Green Building Council
Apr 18 @ 8:00 am – 12:00 pm

Register

Overview

The purpose of this course is to introduce building staff and management to the primary systems in commercial buildings that use energy.  This course will explain how the HVAC, lighting, and building envelope operate, interact, and use energy.  The attendees will learn examples of and good practices for energy efficiency opportunities, overview and tools for making sound economic decisions related to energy efficiency upgrades, and understand when to use nationally recognized energy efficiency tools and their expected level of effort and cost.

Intended Audience

  • Onsite operations and maintenance (O&M) staff looking to increase their knowledge of building science and how to identify energy savings opportunities
  • Building management seeking to become more familiar with how their buildings operate, which variables have the biggest influence on energy costs, and how and when to make energy efficiency upgrades that meet their economic criteria

Scope

  • High-level descriptions of and understandings of the following topics:
    • Building envelope
    • HVAC systems
    • Lighting systems
    • Plug load management
    • Building automation systems (BAS)
    • Building metering with tariff analysis
  • Specific examples, rules-of-thumb, and energy efficiency opportunities for each of the systems described above. These will focus on energy end-use strategies to minimize energy costs, energy demand charges, and overall energy usage.
  • Overview and tools for economic decision making process to include local efficiency incentives available and the application process.
  • Demonstration of the importance and use of nationally recognized energy efficiency tools. Understand when to use each of the tools and the expected level of effort and cost for each.
    • EPA Portfolio Manager
    • DOE Energy Asset Score
    • LEED-EBOM process

Learning Objectives

  1. Have a general knowledge of the primary energy end-use systems of commercial buildings, and how they operate.
  2. Know at least two energy conservation measures (ECMs) for each primary system
  3. Know which energy efficiency screening/documentation tool is best for a given energy upgrade scenario
Building Operator Training and Re-tuning @ Philadelphia - Delaware Valley Green Building Council
Apr 18 @ 1:00 pm – 5:00 pm

Register

Overview

The purpose of this course is to help operations and maintenance (O&M) staff learn how to operate buildings more efficiently, reduce operating cost, and provide energy savings. This course will provide prescriptive best practices for maintaining good operations, and an overview of the re-tuning process using building automation system (BAS) trend data.  Attendees will learn how to look for and optimize the control strategy for many of the common energy saving opportunities such as occupancy scheduling, temperature and static pressure control, and economizer function.  Attendees will also learn basic principles of preventative maintenance, electrical diagnostics, building commissioning, and demand response.

Intended Audience

  • Onsite O&M staff responsible for day-to-day building operations
  • O&M staff management looking to integrate the re-tuning process into their O&M procedures
  • Offsite contractors (retro-commissioning agents or control vendors) hired to improve a building’s energy efficiency

Prerequisite Knowledge

  • Basic understanding of commercial building systems (e.g. air handling units, VAV boxes, boilers, chillers)
  • Familiar with basic functions of building automation systems (BAS)

Scope

  • Prescriptive best practices for good building operations
  • Overview of the re-tuning process using BAS data
  • Actionable guidance on how to look for and optimize the control strategy of each of the following re-tuning measures:
    • Occupancy Scheduling
    • Discharge-Air Temperature Control
    • Discharge- Air Static Pressure Control
    • Air-Handling Unit Heating and Cooling
    • Air- Handling Unit Outside/Fresh Air makeup
    • Air-Handling Unit Economizer Operation
    • Zone Conditioning
    • Central Plant Optimization
  • Basic principles of the following topics and when they are most applicable:
    • Preventative Maintenance and Troubleshooting
    • Electrical and Mechanical Diagnostics
    • Building Commissioning
    • Demand Response Techniques

Learning Objectives

  1. Be able to list five low/no-cost prescriptive O&M measures that may apply to your building
  2. Be able to describe the basics of the re-tuning process, and some of the benefits
  3. List at least three examples of poor operations that can be found through the re-tuning process
May
19
Fri
2017
Introduction to the Building Energy Asset Score (FREE) @ Online
May 19 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Learning Objectives: Students will be introduced to the Building Energy Asset Score. In the Introductory webinar, students are guided through the Asset Score interface as part of creating a new building. They will develop an understanding of the basics for navigating within the tool and gain insight into some best practices for using the tool. Students will be made aware of other educational opportunities such as the video training curriculum, the community of users in the user forum, and getting help with models through the help desk. To visit the Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements

May
26
Fri
2017
Advanced Asset Score Modeling (FREE) @ Online
May 26 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Students will focus on how the Building Energy Asset Score Tool can accommodate them in complex real-world situations and deep-dive into complex scoring examples.

  1. Welcome and introduction to speaker.
  2. Advanced HVAC inputs using Asset Score.
  3. Constructing complex building geometries.
  4. Importing data from EPA Portfolio Manager.
  5. Exporting completed Asset Score project to an OpenStudio Model.
  6. Questions and suggestions for future advanced course topics

To visit the DOE Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements

Jun
2
Fri
2017
Introduction to the Building Energy Asset Score (FREE) @ Online
Jun 2 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Learning Objectives: Students will be introduced to the Building Energy Asset Score. In the Introductory webinar, students are guided through the Asset Score interface as part of creating a new building. They will develop an understanding of the basics for navigating within the tool and gain insight into some best practices for using the tool. Students will be made aware of other educational opportunities such as the video training curriculum, the community of users in the user forum, and getting help with models through the help desk. To visit the Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements