Training Calendar

Request a Training

COMING SOON… NY ENERGY CODES TRAINING

Are there no scheduled dates listed for the training you’re looking for? Request a training

Back to Training Home Page

May 2014 – November 2019

May
12
Mon
2014
RESNET Combustion Safety and Workscope Training for Raters @ Online
May 12 @ 12:00 pm – May 23 @ 1:00 pm

Course Description

All Raters must pass the Combustion Safety and Work scope written exam and simulation prior to December 31st 2014 to maintain their Rater Certification! Raters who are not BPI analyst certified will need an additional 2 hours of field training by the end of 2014 to comply with RESNET standards. This 7 hour online training is conveniently spaced over just 1 week.

All existing Raters must pass both the written and simulation CAZ exams by January 1, 2015, to maintain their Rater certification.

This RESNET Combustion Safety and Workscope Training fulfill this requirement.


Register

Course Objectives

Targeting Health and Safety

  • Ambient Carbon Monoxide per RESNET standards
  • Measurement and protocols
  • Carbon Monoxide in unvented combustion appliances (ovens and ranges)
  • Combustible gas leakage testing

Heating and Cooling Systems

Vented Combustion Appliance Safety Testing

  • Interaction of combustion appliances and makeup air
  • Controlled and uncontrolled makeup air
  • Venting configurations and interaction with the building envelope
  • Depressurization, flame rollout, and backdraft
  • Configuring the home for Worst Case Depressurization testing
  • Measuring and documenting spillage
  • Carbon Monoxide in the venting flue
    • Variations in venting configuration and testing locations (venting & fuel types)
  • Predicting and adjusting for combustion safety problems
    • Correcting depressurization problems per RESNET protocols
    • Workscope recommendations based on CO and spillage testing results
  • Introduction to the RESCAZ training simulator
  • Differences between the BPI and RESNET testing protocols
All online sessions will be recorded for later viewing for our participants convenience.

Schedule

Week 1

Monday May 12th – Kick off and software orientation (online)

Week 2

Tuesday May 20th – RESNET CAZ Training 9-11am (online)

Tuesday May 21th – RESNET CAZ Training 9-11am (online)

Tuesday May 22th – RESNET CAZ Training 9-11am (online)

Friday May 23rd – Testing in Ithaca office or any 3rd party neutral location selected by trainee and approved by trainer

 

 

Jul
3
Thu
2014
Free Webinar: Sneak Peek – RESNET Combustion Safety and Work Scope Training @ Free Webinar
Jul 3 @ 12:30 pm – 1:00 pm

Register

All Raters must pass the Combustion Safety and Work scope written exam and simulation prior to December 31st 2014 to maintain their Rater Certification!  Learn more about this requirement, and talk with our trainers, who will be available to answer your questions.
Aug
5
Tue
2014
RESNET Combustion Safety and Workscope Training for Raters @ Online
Aug 5 @ 9:00 am – Aug 8 @ 11:00 am

Date & Times

  • Optional – July 28, noon to 12:30pm (kickoff)
  • Aug. – 5-7, 9am to 11am (training)
  • Aug. 8 – 9am to noon (CAZ testing)

Accreditation: 7 PDCs

Course Description

All Raters must pass the Combustion Safety and Work scope written exam and simulation prior to December 31st 2014 to maintain their Rater Certification! Raters who are not BPI analyst certified will need an additional 2 hours of field training by the end of 2014 to comply with RESNET standards. This 7 hour online training is conveniently spaced over just 1 week.

All existing Raters must pass both the written and simulation CAZ exams by January 1, 2015, to maintain their Rater certification.

This RESNET Combustion Safety and Workscope Training fulfill this requirement.


Register

 

 

Course Objectives

Targeting Health and Safety

  • Ambient Carbon Monoxide per RESNET standards
  • Measurement and protocols
  • Carbon Monoxide in unvented combustion appliances (ovens and ranges)
  • Combustible gas leakage testing

Heating and Cooling Systems

Vented Combustion Appliance Safety Testing

  • Interaction of combustion appliances and makeup air
  • Controlled and uncontrolled makeup air
  • Venting configurations and interaction with the building envelope
  • Depressurization, flame rollout, and backdraft
  • Configuring the home for Worst Case Depressurization testing
  • Measuring and documenting spillage
  • Carbon Monoxide in the venting flue
    • Variations in venting configuration and testing locations (venting & fuel types)
  • Predicting and adjusting for combustion safety problems
    • Correcting depressurization problems per RESNET protocols
    • Workscope recommendations based on CO and spillage testing results
  • Introduction to the RESCAZ training simulator
  • Differences between the BPI and RESNET testing protocols
All online sessions will be recorded for later viewing for our participants convenience.

 

Sep
26
Fri
2014
Free Webinar: Sneak Peek – RESNET Combustion Safety and Work Scope Training @ Free Webinar
Sep 26 @ 12:30 pm – 1:00 pm

Register

All Raters must pass the Combustion Safety and Work scope written exam and simulation prior to December 31st 2014 to maintain their Rater Certification!  Learn more about this requirement, and talk with our trainers, who will be available to answer your questions.
Nov
4
Tue
2014
RESNET Combustion Safety & Workscope (CAZ) Online Training @ Online
Nov 4 @ 9:00 am – Nov 7 @ 11:00 am

Register

7 PDCsfor this class

3.5 CEUsfor this class

Dates:

  • Oct. 27 – noon to 1pm (training kickoff)
  • Nov 4, 9am – 11am (training)
  • Nov 5, 9am – 11am (training)
  • Nov 6, 9am – 11am (training)
  • Nov 7 (testing)

Course Description

With increased national demand for comprehensive retrofits, the RESNET Board of Directors has made it a requirement that RESNET certified Raters must pass the Combustion Safety and Work Scope written exam and simulation prior to December 31st, 2014, to maintain the Rater Certification. This 7-hour online training designed for Raters who are also BPI certified, is conveniently spaced over just 1 week and will prepare attendees to take and pass the tests.

All existing Raters must pass both the written and simulation CAZ exams by January 1, 2015, to maintain their Rater certification.

This RESNET Combustion Safety and Workscope Training fulfill this requirement.

*Raters who are not BPI analyst certified will need an additional 2 hours of field training by the end of 2014 to comply with RESNET standards.*


Course Objectives

Targeting Health and Safety

  • Ambient Carbon Monoxide per RESNET standards
  • Measurement and protocols
  • Carbon Monoxide in unvented combustion appliances (ovens and ranges)
  • Combustible gas leakage testing

Heating and Cooling Systems

Vented Combustion Appliance Safety Testing

  • Interaction of combustion appliances and makeup air
  • Controlled and uncontrolled makeup air
  • Venting configurations and interaction with the building envelope
  • Depressurization, flame rollout, and backdraft
  • Configuring the home for Worst Case Depressurization testing
  • Measuring and documenting spillage
  • Carbon Monoxide in the venting flue
    • Variations in venting configuration and testing locations (venting & fuel types)
  • Predicting and adjusting for combustion safety problems
    • Correcting depressurization problems per RESNET protocols
    • Workscope recommendations based on CO and spillage testing results
  • Introduction to the RESCAZ training simulator
  • Differences between the BPI and RESNET testing protocols
All online sessions will be recorded for later viewing for our participants convenience.

 

Dec
3
Wed
2014
RESNET Combustion Safety & Workscope (CAZ) Online Training @ Online Training
Dec 3 @ 9:00 am – Dec 5 @ 12:00 pm

Register

7 PDCsfor this class

3.5 CEUsfor this class

Dates:

  • 24 Nov – noon to 1pm (training kickoff)
  • Dec 3, 9am – 12pm (training)
  • Dec 4, 9am – 12pm (training)
  • Dec 5 (testing)

Course Description

With increased national demand for comprehensive retrofits, the RESNET Board of Directors has made it a requirement that RESNET certified Raters must pass the Combustion Safety and Work Scope written exam and simulation prior to December 31st, 2014, to maintain the Rater Certification. This 7-hour online training designed for Raters who are also BPI certified, is conveniently spaced over just 1 week and will prepare attendees to take and pass the tests.

All existing Raters must pass both the written and simulation CAZ exams by January 1, 2015, to maintain their Rater certification.

This RESNET Combustion Safety and Workscope Training fulfill this requirement.

*Raters who are not BPI analyst certified will need an additional 2 hours of field training by the end of 2014 to comply with RESNET standards.*


Course Objectives

Targeting Health and Safety

  • Ambient Carbon Monoxide per RESNET standards
  • Measurement and protocols
  • Carbon Monoxide in unvented combustion appliances (ovens and ranges)
  • Combustible gas leakage testing

Heating and Cooling Systems

Vented Combustion Appliance Safety Testing

  • Interaction of combustion appliances and makeup air
  • Controlled and uncontrolled makeup air
  • Venting configurations and interaction with the building envelope
  • Depressurization, flame rollout, and backdraft
  • Configuring the home for Worst Case Depressurization testing
  • Measuring and documenting spillage
  • Carbon Monoxide in the venting flue
    • Variations in venting configuration and testing locations (venting & fuel types)
  • Predicting and adjusting for combustion safety problems
    • Correcting depressurization problems per RESNET protocols
    • Workscope recommendations based on CO and spillage testing results
  • Introduction to the RESCAZ training simulator
  • Differences between the BPI and RESNET testing protocols
All online sessions will be recorded for later viewing for our participants convenience.

 

Feb
9
Thu
2017
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Feb 9 @ 1:00 pm – Feb 15 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • (Online 5-days) February 9-10 and 13-15, 201 (1-5pm EST)
  • (Optional 2-Hour) SketchUp Training: February 8, 2017 (1-3pm EST), +$150.00

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Feb 9 @ 1:00 pm – Feb 15 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • (Online 5-days) February 9-10 and 13-15, 201 (1-5pm EST)
  • (Optional 2-Hour) SketchUp Training: February 8, 2017 (1-3pm EST), +$150.00

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Feb
28
Tue
2017
ADVANCE ASSET SCORE MODELING (FREE) @ Online
Feb 28 @ 1:00 pm – 2:00 pm

Register FREE

asset-score-logos

Learning Objective:

Students will focus on how the Building Energy Asset Score Tool can accommodate them in complex real-world situations and deep-dive into complex scoring examples.

  1. Welcome and introduction to speaker.
  2. Advanced HVAC inputs using Asset Score.
  3. Constructing complex building geometries.
  4. Importing data from EPA Portfolio Manager.
  5. Exporting completed Asset Score project to an OpenStudio Model.
  6. Questions and suggestions for future advanced course topics

To visit the DOE Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

May
19
Fri
2017
Introduction to the Building Energy Asset Score (FREE) @ Online
May 19 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Learning Objectives: Students will be introduced to the Building Energy Asset Score. In the Introductory webinar, students are guided through the Asset Score interface as part of creating a new building. They will develop an understanding of the basics for navigating within the tool and gain insight into some best practices for using the tool. Students will be made aware of other educational opportunities such as the video training curriculum, the community of users in the user forum, and getting help with models through the help desk. To visit the Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements

May
26
Fri
2017
Advanced Asset Score Modeling (FREE) @ Online
May 26 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Students will focus on how the Building Energy Asset Score Tool can accommodate them in complex real-world situations and deep-dive into complex scoring examples.

  1. Welcome and introduction to speaker.
  2. Advanced HVAC inputs using Asset Score.
  3. Constructing complex building geometries.
  4. Importing data from EPA Portfolio Manager.
  5. Exporting completed Asset Score project to an OpenStudio Model.
  6. Questions and suggestions for future advanced course topics

To visit the DOE Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements

Jun
2
Fri
2017
Introduction to the Building Energy Asset Score (FREE) @ Online
Jun 2 @ 2:00 pm – 3:00 pm

Register FREE

asset-score-logos

Learning Objective:

Learning Objectives: Students will be introduced to the Building Energy Asset Score. In the Introductory webinar, students are guided through the Asset Score interface as part of creating a new building. They will develop an understanding of the basics for navigating within the tool and gain insight into some best practices for using the tool. Students will be made aware of other educational opportunities such as the video training curriculum, the community of users in the user forum, and getting help with models through the help desk. To visit the Building Energy Asset Score website go to: http://www.energy.gov/eere/buildings/building-energy-asset-score

After registering, you will receive a confirmation email containing information about joining the webinar.

View System Requirements

Aug
1
Tue
2017
TREAT Single Family Online Training @ Online
Aug 1 @ 1:00 pm – Aug 2 @ 5:00 pm

Register

Only 4 hours over 2 days, so it’s easy to fit in your schedule!

Time: 1pm to 5pm each day

Price: $225

Interested in reducing your modeling effort? TREAT Single Family training is perfect for new and current TREAT users. We’ll teach you the best practices needed to streamline your modeling time. Reducing data input effort, calibrating your models, and ensuring that your projects are accurate and show savings!

This eight-hour training will help you get the most from TREAT, our award-winning energy modeling software.  The course focuses predominately on using TREAT for single family residential projects. We will cover a bit of Multifamily modeling towards the end of day 2!

  • Learn techniques to streamline the modeling process and complete more models in less time.
  • Learn the TREAT essentials you’ll need to become more productive.
    • Utilizing smart defaults and preferences to reduce your modeling effort!
  • Create a sample building energy model during the class.
  • Learn more about some of the latest features available in TREAT 3.5!

Creating a model of energy usage can be complex!  This training covers the TREAT features, including the Project Wizard, that will help you create TREAT models quickly and efficiently.

Accreditation: 6 BPI CEUs

 

Jan
8
Mon
2018
Introduction to OpenStudio for New Construction Modeling (Online 14 PDH) @ Online
Jan 8 @ 1:00 pm – Jan 12 @ 5:00 pm

Register

Credits

14 PDHs for this class

Date and Times:

  • (Online 5-days) Jan. 8-12, 2018 (1-5pm EST)

Course Description

This 5-day online training course will teach students how to leverage the free NREL OpenStudio modeling ecosystem to quickly and efficiently generate flexible models for energy analysis. Students will learn effective modeling workflows for using the OpenStudio Sketchup Plugin to construct building form and fabric and assigning space attributes. HVAC and service hot water systems will be configured using the OpenStudio Application. The OpenStudio Application integrates with NREL’s Building Component Library (BCL), providing libraries of pre-defined configurable energy conservation measures for easily modifying energy models. PAT (Parametric Analysis Tool) will be used to demonstrate how model variants can be configured to run in cloud computing environments (Amazon EC2). Students will also be exposed to OpenStudio’s capabilities for extension through Ruby Scripting, both for creating custom energy conservation measures and for generating useful summary and detailed output.

 


Course Objectives

  1. Learn to use the OpenStudio modeling ecosystem to effectively model the energy and lighting performance and consumption for new and existing buildings.
  2. Learn how careful OS model configurations can allow for rapid alterations and manipulations.
  3. Learn how to use the power of OpenStudio “measures” to easily evaluate changes to your building model.
  4. Learn how to configure the Parametric Analysis Tool (PAT) for conducting modeling studies
  5. Learn how to effectively extract and interpret results from PAT modeling studies
Nov
19
Tue
2019
WaterSense Inspector Training @ Online
Nov 19 @ 8:30 am – 12:30 pm

$175/participant. Includes 4 hour online live training and certificate of completion. Upon completion WaterSense Inspector Candidates are ready to sign up with a WaterSense Provider to complete certification. Raters that belong to PSD Provider group will receive a $15 discount on the training. Contact Sue Davis at sdavis@psdconsulting.com for your member discount code.