(R3.2) Residential: Efficient Forced Air Distribution (Pt 2)
2023-09-20 10:15 - 11:45 (America/New_York) | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R3.2 Residential: Efficient Forced Air Distribution Part 2
T02-07-2862
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
In this course attendees will understand the importance of duct testing, sealing, and installation on the total performance of a house heating and cooling system. Attendees will be able to distinguish various code requirements based on duct proximity to the building thermal envelope. In addition, attendees will learn duct insulation requirements and methods. Attendees will be introduced to a customizable Duct and Envelope Testing (DET) reporting form to make demonstrating code compliance straightforward and efficient.
Learning Objectives:
1. Understand the consequences of leaky duct systems
2. Understand how to achieve tight ducts
3. Identify and resolve other common duct installation problems
4. Utilize the provided duct and envelope testing (DET) form to document or verify compliance with duct testing requirements

(C4.1) Electrifying the Energy Code - Commercial
2023-09-21 08:30 - 10:00, 2023-10-17 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C4.1- Electrifying the Energy Code
T02-07-3134
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The first part of the program will cover IECC Appendix CA: Solar-Ready Zone along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. This section will also discuss what it means to include a “collateral dead load” in gravity and lateral design calculations for the roof.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(C4.2) Electrifying the Energy Code - Commercial
2023-09-21 10:15 - 11:45, 2023-10-17 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C4.2- Electrifying the Energy Code
T02-07-3141
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The second part of the program will cover the EV Charging Station Capable requirements and provide detailed coverage of the five additional power distribution packages in NYStretch Appendix CC. A particular emphasis will be placed on how to accomplish the requirements for the more complex packages, including electrical energy monitoring and interoperable automated demand response.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(R1.1) Residential Energy Plan Reviews in 15 Minutes or Less (Pt 1)
2023-09-26 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential Energy Plan Reviews in 15 Minutes or Less (Pt 1)
T02-07-2829
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Countless previous research shows that code officials have very limited time to perform thorough plan reviews and that energy code provisions are often the first items to be jettisoned. This webinar is Part 1 of a two-part series, and will not only help code officials, but also those responsible for preparing construction documents. Participants will understand what’s required to do quick – yet thorough – document submittals and plan reviews. Sample checklists, worksheets and other forms will be discussed and downloadable.
LEARNING OBJECTIVES:
1. Describe a process for reviewing residential plans that includes assessing the highest impact energy code provisions
2. Understand the inputs to provided forms and checklists such as duct and envelope testing verification and HVAC design forms and integrate them into your organization’s normal compliance documentation or enforcement processes
3. Recreate a timeline that includes which construction details and verification forms needed to be provided/collected
4. Describe how third-party energy professionals such as duct and envelope testers and HERS Raters fit into the inspection process

(R1.2) Residential Energy Inspections in 15 Minutes or Less (Pt 2)
2023-09-26 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential Energy Inspections in 15 Minutes or Less (Pt 2)
T02-07-2863
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
Countless previous research shows that code officials have very limited time to perform thorough energy code inspections. This 90-minute webinar will cover the five required inspections: footing and foundation; Framing and rough-in; Plumbing, Mechanical and Final. Part 2 of a two-part series, this course will not only help code officials but also those responsible for designing and constructing residential buildings. Participants will understand what’s required to do quick – yet thorough – site inspections. Sample inspection checklists, worksheets and other forms will be discussed and downloadable.
Learning objectives:
After taking this course, attendees will be able to…
1. Describe a process for inspecting residential construction that includes assessing the highest impact energy code provisions
2. Understand the inputs to provided forms and checklists such as duct and envelope testing verification and HVAC design forms and integrate them into your organization’s compliance documentation or enforcement processes
3. Recreate a timeline that includes which construction details and verification forms need to be provided/collected and when in the design/construction process
4. Describe how third-party energy professionals such as duct and envelope testers and HERS Raters fit into the inspection process

(C1.1) Mechanical Systems for Large Commercial Buildings (Pt 1)
2023-09-27 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(C1.1) Mechanical Systems for Large Commercial Buildings (Part 1)
T02-07-2910
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
Large commercial buildings are common in large urban areas, and while less common in suburban and rural areas, they have large per-building energy impacts. This program will prepare design professionals and code enforcement officials ensure their work results in buildings with better-than-average energy use intensities.
Attendees will be asked to pinpoint the locations in construction documents where various mechanical controls and equipment specifications are (or should be). Guided discussions will help attendees identify the best ways to provide adequate documentation on plans and inspect or elucidate control configurations in the field.
Learning Objectives:
Attendees will be able to…
1. Understand the types and basic functions of common and complex HVAC systems
2. Identify where ventilation and related equipment are required including economizers, demand-controlled ventilation, and energy recovery ventilation
3. Understand fan power limitation calculations and how to determine if systems meet code limits
4. Know when commissioning is required and identify what is needed to show compliance

(C1.2) Lighting Systems for Large Commercial Buildings (Pt 2)
2023-09-27 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(C1.2) Lighting Systems for Large Commercial Buildings Part 2
T02-07-2908
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Large commercial buildings are common in large urban areas, and while less common in suburban and rural areas, they have large per-building energy impacts. This program will prepare design professionals and code enforcement officials to ensure their work results in buildings with better-than-average energy use intensities.
Attendees will be asked to pinpoint the locations in construction documents where various lighting controls and equipment specifications are (or should be). Attendees will understand lighting power code requirements for both interior and exterior applications. Guided discussions will help attendees identify the best ways to provide adequate documentation on plans and inspect or elucidate control configurations in the field.
Learning objectives:
1- Understand the 2020 ECCCNYS code requirements for commercial lighting systems
2- Understand lighting power density calculations and how to determine if building and space types meet code limits
3- Understand how to do calculate exterior lighting power allowances
4- How to provide evidence of lighting functional testing

R3.1 - Air Barrier and Insulation Installation
2023-09-27 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA 1 BPI 1 Building official
Course Description:
The installation of a continuous air and thermal barrier is perhaps the best and most cost-effective way to reduce energy waste and save money on utility bills; at the same time, important details are often missed. This course will be framed around the 2018 IECC Air Barrier and Insulation Installation criteria found in Table 402.4.1.1 with photos and graphics to illustrate noncompliant and compliant installation of critical details like attic penetrations, wall-to-ceiling transitions, rim joists, garage walls, knee walls, and tubs and showers on exterior walls. Installing and inspecting insulation to meet code and manufacturer requirements will also be discussed.

C7.1 - Building Systems Commissioning: Saving Money and Meeting Code
2023-09-27 14:05 - 15:05 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Code Review), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – Building Systems Commissioning: Saving Money and Meeting Code
COURSE DESCRIPTION:
Building commissioning reduces energy bills, improves comfort, reduces CO2 and other emissions, and… it is the law. According to data from US Energy Information Administration (EIA), in 2018 commercial buildings accounted for over 18% of the energy consumed in the US, with over half that energy dedicated to heating, cooling, and lighting. While most building owners and builders understand the importance of high-efficacy lighting and efficient HVAC systems, the importance of building system commissioning is less widely appreciated. Studies have shown that the operating efficiency of commercial buildings improves by as much as 13% with commissioning.
This course will provide an overview of mechanical systems and lighting commissioning including the benefits to building owners and occupants, the general commissioning process, and a review of energy code requirements and associated documentation. The course will also identify the roles that building owners, builders, code officials, and commissioning agents play in the commissioning process and highlight relevant industry standards and certifications.
LEARNING OBJECTIVES:
Attendees will be able to…
1. Describe the code requirements for building systems commissioning.
2. Understand the different phases of the commissioning process.
3. Identify the roles of building owners, commissioning providers, builders, and building code officials.
4. Provide and review the required commissioning documentation.

(R5.1) The Energy Code and Existing Buildings (Residential) - Part 1
2023-09-28 08:30 - 10:00, 2023-10-18 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 1
T02-07-3138
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

(R5.2) The Energy Code and Existing Buildings (Residential) - Part 2
2023-09-28 10:15 - 11:45, 2023-10-18 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 2
T02-07-3139
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

(R2.1) ECCCNYS Residential - Air Sealing to 3 ACH50 (Part 1)
2023-10-03 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – Air Sealing to 3 ACH50 (R2.1) Part 1
T02-07-2843
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Relevant market research, including the DOE Residential Field Study, revealed significant noncompliance with 3 ACH50, and multiple other field studies in nearby geographies and uncovered lack of proper insulation installation. This webinar training covers air sealing, air barriers, blower-door testing, identification of potential leakage sites in CAD details, 3D graphics, and photographs, for single family residential including other issues, such as party walls, in low-rise multifamily. This webinar is Part 1 of a two-part series on energy code envelope requirements. Both webinars include test-your-knowledge questions, and guided discussion of pros/cons of various strategies.
Learning Objectives:
1. Understand how to review, install, and inspect details necessary to achieve an envelope leakage rate of 3 ACH50 or less
2. Differentiate between several air sealing techniques
3. Identify and resolve common leakage areas
4. Understand code requirements for air sealing from the 2020 ECCCNYS Table 402.4.1.1 Air Barrier and Insulation Installation.

(R2.2) - ECCCNYS Residential Envelope (Pt 2): Other Requirements
2023-10-03 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – Other NYSECCC Envelope Requirements (R2.2)
T02-07-2849
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Relevant market research, including the DOE Residential Field Study, revealed significant noncompliance with 3 ACH50, and multiple other field studies in nearby geographies uncovered lack of proper insulation installation. This webinar training covers energy code insulation installation requirements, and includes mock-ups, identification and potential problem sites in CAD details, 3D graphics, and photographs for single family residential and other issues, such as party walls in low-rise multifamily. This webinar is Part 2 of a two-part series and includes test-your-knowledge questions, and guided discussion of pros/cons of various strategies.
Learning Objectives
1: Understand how to review, install, and inspect details necessary to achieve envelope insulation requirements
2: Differentiate between several insulation techniques
3: Identify and resolve common problem areas such as cold corners
4: Understand code requirements for insulation installation from the 2020 ECCCNYS Table 402.4.1.1 Air Barrier and Insulation Installat

(C3.1) - Simple Commercial Building Case Studies (Pt 1)
2023-10-04 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C3.1 – Simple Commercial Building Case Studies Part 1
T02- 07-3069
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
This course will cover 2020 ECCCNYS requirements in the context of a retail building case study. The first portion of the program will cover owner-installed building envelope requirements for a typical retail store. The second portion will cover tenant-installed items, including single-zone HVAC systems and lighting. The third and final portion of the program will be a plan review exercise with audience participation that is intended to enhance knowledge retention.

(C3.2) - Simple Commercial Building Case Studies (Pt 2)
2023-10-04 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C3.2- Simple Commercial Building Case Studies part 2
T02-07-3070
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will cover 2020 ECCCNYS requirements in the context of two case studies. The first will be a change of occupancy from a warehouse or office to a 4-story mixed-use apartment building and the second will be a new office building. This course will cover envelope, mechanical, and lighting requirements for these building types and include an interactive example to test your knowledge and improve retention.

(M1.1) - Multifamily Air Sealing
2023-10-05 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
M1.1 – Multifamily Air Sealing
T02-07-3088
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will cover 2020 ECCCNYS requirements in the context of multifamily buildings. The first portion of the program will cover the energy code requirements for multifamily buildings. The second portion of the program will cover the energy code requirements as they apply to residential buildings in respect to air sealing. The third portion of the program will cover the energy code requirements for commercial buildings in respect to air sealing. The fourth and final portion of program will explore additional opportunities such as NYStretch and details to be considered
After taking this course, attendees will be able to…
i. Understand the scope of the residential versus the commercial provisions of the ECCCNYS regarding multifamily buildings
ii. Identify and eliminate the biggest sources of air leakage in multifamily buildings
iii. Describe various, important air sealing design and construction details
iv. Better understand the Energy Code’s requirements for air barrier construction and testing

(M1.2) - Multifamily Thermal Bridging
2023-10-05 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
T02-07-3099
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!

(R4.0) Electrifying the Energy Code - Residential
2023-10-10 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – Electrifying the Energy Code
T02-07-3133
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Following an introduction to the benefits of electrification, this course will review the requirements of IECC Appendix RA (Solar-Ready Provisions) along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. The course will walk through several examples and ask attendees to determine whether the solar-ready provisions apply to a particular building, given its type, orientation, roof design and other considerations. The course will also review examples of how to fit in the required solar ready zone considering obstructions and required setbacks. Example documentation will also be reviewed. Finally, the course will cover the electric vehicle service equipment capable requirements of NYStretch and how adopting these provisions will help with the electrification of New York’s transportation system.
Learning Objectives
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch and IECC Appendix RA

(R7.1) Put a Lid On It Part 1: Unvented Attics
2023-10-10 10:15 - 11:45
NYSERDA Energy Code Training provided by Performance Systems Development
R7.1 – Put a Lid On It Part 1 – Unvented Attics
T02-07-3192
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Bringing attic and crawl spaces inside the thermal envelope is a great way to simultaneously improve energy efficiency and moisture management. One of the main ways unvented attics and crawl spaces reduce energy waste is by bringing ducts and air handlers inside (which is a requirement of NYStretch and the NYCECC). This can also be cost-effective for builders as they eliminate the requirement for duct testing. But there are risks associated with installing these assemblies improperly, so it is important to meet all related requirements in the RCNYS. For unvented attics, these include a minimum R-value of air impermeable insulation or above-roof deck insulation and proper installation and location of vapor retarders. For unvented crawl spaces, builders must take care to install vapor barriers over exposed earth and provide a means of evacuating moisture. For both strategies, the use of spray foam also brings in fire safety requirements from the RCNYS for thermal or ignition barriers. This course will provide a review of the benefits of unvented attics and crawl spaces, related building science concepts, and energy and residential code requirements.
Learning Objectives:
1- Describe the energy efficiency benefits of unvented attics and crawl spaces
2- Describe durability benefits of unvented attics and crawl spaces
3- Understand energy code requirements related to these assemblies

(R6.1) Don't Be Left Exposed - Part 1: Meeting the Energy Code with the Safe Use of Foam Insulation
2023-10-11 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R6.1 – Don’t Be Left Exposed – Part 1 – Meeting the Energy Code with the Safe Use of Foam Insulation
T02-07-3158
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Rigid foam board and spray foam insulation are common material choices to help achieve energy code compliance, but when installed improperly can create fire hazards. Foam products general must be covered from the interior with thermal or ignition barriers, but sometimes may be left exposed via “specific approvals.” The challenge for homebuilders, design professionals, insulation contractors, and code officials is knowing which requirements apply to which applications. This course will cover RCNYSrequirements for common applications of foam insulation in residential construction, including crawl space walls, basement walls, roofs, attic hatches, knee walls, rim joists, and exterior sheathing. These requirements will be presented in the context of meeting ECCCNYS requirements for these building components.
LEARNING OBJECTIVES:
1- Understand the thermal envelope insulation requirements of the energy code
2- Differentiate between several categories of common foam insulation materials
3- Describe common applications of foam insulation materials and under what conditions these products need to be covered
4- Locate and use documentation for “specific applications” for when foam may be left exposed

(R6.2) Don't Be Left Exposed - Part 2: Meeting the Energy Code with the Safe Use of Foam Insulation
2023-10-11 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R6.2 – Don’t Be Left Exposed – Part 2 – Meeting the Energy Code with the Safe Use of Foam Insulation
T02-07-3170
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Rigid foam board and spray foam insulation are common material choices to help achieve energy code compliance, but when installed improperly can create fire hazards. Foam products general must be covered from the interior with thermal or ignition barriers, but sometimes may be left exposed via “specific approvals.” The challenge for homebuilders, design professionals, insulation contractors, and code officials is knowing which requirements apply to which applications. This course will cover RCNYSrequirements for common applications of foam insulation in residential construction, including crawl space walls, basement walls, roofs, attic hatches, knee walls, rim joists, and exterior sheathing. These requirements will be presented in the context of meeting ECCCNYS requirements for these building components.
LEARNING OBJECTIVES:
1- Understand the thermal envelope insulation requirements of the energy code
2- Differentiate between several categories of common foam insulation materials
3- Describe common applications of foam insulation materials and under what conditions these products need to be covered
4- Locate and use documentation for “specific applications” for when foam may be left exposed

(C5.1) The Energy Code and Existing Buildings (Commercial) - Part 1
2023-10-12 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C5.1 – The Energy Code and Existing Buildings (Commercial) – Part 1
T02-07-3163
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
This course will provide a review of IECC Chapter 5 [CE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 10percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES:
1- Determine when construction in existing buildings needs to meet the energy code like new construction
2- Determine situations where exception apply
3- Understand various prescriptive energy code requirements for existing building projects requiring compliance like new construction
4- Describe documentation necessary to take the historic buildings exemption

(C5.2) The Energy Code and Existing Buildings (Commercial) - Part 2
2023-10-12 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C5.2 – The Energy Code and Existing Buildings (Commercial) – Part 2
T02-07-3164
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
This course will provide a review of IECC Chapter 5 [CE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems,new lighting where 10percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES:
1- Determine when construction in existing buildings needs to meet the energy code like new construction
2- Determine situations where exception apply
3- Understand various prescriptive energy code requirements for existing building projects requiring compliance like new construction
4- Describe documentation necessary to take the historic buildings exemption

(S3.1) NYStretch Energy Code for Commercial Buildings (Pt 1)
2023-10-19 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
S3.1 NYStretch Energy Code for Commercial Buildings (Pt 1) 90 minutes
T02-07-2987
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 1 of a two-part series covering several requirements in the NYStretch Code for commercial buildings including: code compliance paths; building thermal envelope; mechanical systems; service water heating; commissioning; and, additions and alterations. We also discuss the intention and benefits of this voluntary code and its relationship to the New York City energy code.
Learning objectives:
1-Identify all available energy code compliance pathways under NYStretch
2- Identify differences between NYStretch and the base energy code
3-Understand which provisions are modifications of the IECC/ASHRAE versus an expansion in scope
4- Identify and understand all mandatory requirements (items that must be met regardless of compliance path)

(S3.2) NYStretch Energy Code for Commercial Buildings (Pt 2)
2023-10-19 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(S3.2) NYStretch Energy Code for Commercial Buildings (Pt 2) 90 minutes
T02-07-2991
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 2 of a two-part series covering several requirements in the NYStretch Code for commercial buildings including: Electric Power; Appendix CA; Kitchen Equipment and Elevators; Building Monitoring; Lighting; Total Building Performance; Additional Efficiency Packages and Appendix CC. We also discuss the intention and benefits of this voluntary code and its relationship to the New York City energy code.
Learning objectives:
1- Understand requirements for Electric Power and Lighting under NYStretch.
2- Understand requirements for Appendix CA Solar-Ready.
3- Identify requirements for commercial kitchen appliances and elevators.
4- Understand which provisions are modifications of the base code versus an expansion in scope.

R1.1 - 2023 Residential Stretch Code Overview (Part 1)
2023-10-25 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA 1 BPI 1 Building official
Residential Stretch Code Overview Part 1:
This module is meant to give a introduction to the new residential stretch code and what has changed. High level discussion of prescriptive pathway and how it applies to existing buildings 1000sqft and under. Updates to the new residential stretch code such as existing buildings over 1000 sqft, HRV/RRV mechanical ventilation. We discuss new HERS numbers and when they go into effect. Discuss the mandatory requirements that must be meet. Look at EV ready requirements and Solar ready requirements. The new municipal opt in code will be discussed.
