PSD

MA - C3.2 - Commercial Existing Buildings Part 2 Additions
2024-08-28 14:05 - 15:05 (America/New_York) | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code Review), 1 AIA, 1 BPI, 1 Building official
Part 2:
Commercial renovation projects dominate permit request applications across the Commonwealth and hold tremendous opportunity for energy savings via energy code compliance; yet confusion abounds as to how the 2023 Stretch Energy Code applies to renovating these existing buildings.
This presentation will address how to determine what constitutes an addition, while also providing an overview of how the 2023 Stretch Energy Code applies specifically to commercial additions, including the different requirements for both “large” and “small” additions.
Learning Objectives:
• Understand how to apply the Stretch Code to existing commercial buildings.
• Determine the applicable compliance pathway for additions under the stretch code based on the size of a building.
• Differentiate between the requirements for a change of use or occupancy, and an alteration.
• Summarize the key requirements of Chapter 5 Existing Buildings and how it impacts compliance with the Stretch Code.
• Outline the requirements of Chapter 4 as they relate to alterations.

Choosing the Right Commercial Compliance Path: Documentation and Tools
2024-09-03 01:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-hour training focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the reporting requirements and documentation that must be submitted to code officials for both compliance paths. It provides instructions for filling out the DOE/PNNL Compliance Form and Companion Tool for projects following the Relative Performance Path, and instructions for filling out the TEDI Compliance Tool for projects following the Targeted Performance path. The training covers productivity tips, efficient workflow, common mistakes, and best practices.
Learning Objectives:
1. List the documentation that must be submitted to code officials for projects following performance paths of compliance.
2. Understand how to fill out the TEDI Compliance Tool for Targeted Performance Path projects.
3. Understand how to fill out the Compliance Form and Companion Tool for Relative Performance Path projects.

C7.1 - Building Systems Commissioning: Saving Money and Meeting Code
2024-09-17 14:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Code Review), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – Building Systems Commissioning: Saving Money and Meeting Code
COURSE DESCRIPTION:
Building commissioning reduces energy bills, improves comfort, reduces CO2 and other emissions, and… it is the law. According to data from US Energy Information Administration (EIA), in 2018 commercial buildings accounted for over 18% of the energy consumed in the US, with over half that energy dedicated to heating, cooling, and lighting. While most building owners and builders understand the importance of high-efficacy lighting and efficient HVAC systems, the importance of building system commissioning is less widely appreciated. Studies have shown that the operating efficiency of commercial buildings improves by as much as 13% with commissioning.
This course will provide an overview of mechanical systems and lighting commissioning including the benefits to building owners and occupants, the general commissioning process, and a review of energy code requirements and associated documentation. The course will also identify the roles that building owners, builders, code officials, and commissioning agents play in the commissioning process and highlight relevant industry standards and certifications.
LEARNING OBJECTIVES:
Attendees will be able to…
1. Describe the code requirements for building systems commissioning.
2. Understand the different phases of the commissioning process.
3. Identify the roles of building owners, commissioning providers, builders, and building code officials.
4. Provide and review the required commissioning documentation.

Energy Modeling for Commercial Compliance Pathways (Part 1)
2024-09-24 10:00 - 12:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 1 of a 4 Part presentation. Viewing all parts is required to receive credit.
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

Energy Modeling for Commercial Compliance Pathways (Part 2)
2024-09-24 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 2 of a 4 Part presentation. Viewing all parts is required to receive credit.
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

R6.0 - The Massachusetts Stretch Energy Code for HERS Raters
2024-09-24 13:00 - 16:00, 2024-10-23 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 3 CSL (Code Review), 3 AIA, 3 BPI, 3 Code Official, 3 RESNET PDHs
Description:
The Massachusetts Stretch Energy Code incorporates a blend of energy rating requirements and International Energy Conservation Code (IECC) requirements, which often leads to confusion. This course covers the requirements of the Energy Rating Index (ERI) path, as amended by Massachusetts, and IECC “mandatory” requirements. This course, specifically designed for HERS Raters, reviews details of the ERI path, including rating standard options, renewable energy bonuses, and verification and documentation requirements. It will also discuss every IECC requirement that is mandatory under the ERI path, including envelope, mechanical system, service hot water, and whole-house mechanical ventilation. The Stretch Code requires a completed ENERGY STAR Thermal Enclosure System Checklist, and this course will provide a review of the items required on this checklist in comparison to the IECC Air Barrier and Insulation Installation Criteria, which are also required. The course will also describe duct leakage testing requirements, including IECC and RESNET 301 testing exemptions and related modeling issues. Finally, the course will briefly touch on the alternative ERI path (Passive House), EV-Ready requirements, and solar-ready requirements.
1. Have knowledge of the Stretch Code and how it is adopted locally to improve energy efficiency over the base code.
2. Compare and contrast the compliance options available for new construction, such as Prescriptive, ERI, and Passive House.
3. Learn the requirements of Appendix RB: Solar Ready as well as the EV Ready and its requirements.
4. Define the Specialized Code and explain how it results in zero- or near-zero energy buildings

R3.3 - Residential Ventilation Done Right: Why and How
2024-09-25 13:00 - 14:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Building official, 1 RESNET PDH
Part 3:
Mechanical ventilation is as important to indoor air quality as it is for energy conservation. The second part of the course will cover 2021 IECC, IRC, and Massachusetts amendments relating to whole-house mechanical ventilation system requirements. The new requirement of HRV and ERV only systems will be discussed. This will include when whole-house ventilation is required, how to calculate the minimum design airflow rate, and how to verify installed airflow rates.

C3.3 - Commercial Existing Buildings Part 3 Alterations
2024-09-25 14:05 - 15:05
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code Review), 1 AIA, 1 BPI, 1 Building official
Part 3:
Commercial renovation projects dominate permit request applications across the Commonwealth and hold tremendous opportunity for energy savings via energy code compliance; yet confusion abounds as to how the 2023 Stretch Energy Code applies to renovating these existing buildings.
This presentation will address how to determine what constitutes an alteration, while also providing an overview of how the 2023 Stretch Energy Code applies specifically to commercial alterations, including the use of the Component Performance Alternative.
Learning Objectives:
• Learn how to apply the Stretch Code to existing commercial buildings.
• Determine what stretch code requirements apply to commercial alterations & repairs.
• Identify what components of a building alteration need to comply with the stretch code.
• Summarize the key requirements of Chapter 5 Existing Buildings and how it impacts compliance with the Stretch Code.
• Outline the requirements of Chapter 4 as they relate to alterations.

Energy Modeling for Commercial Compliance Pathways (Part 3)
2024-09-26 10:00 - 12:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 3 of a 4 Part presentation. Viewing all parts is required to receive credit.
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

Energy Modeling for Commercial Compliance Pathways (Part 4)
2024-09-26 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 4 of a 4 Part presentation. Viewing all parts is required to receive credit.
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

Stretch Energy Code 2023 for Commercial Buildings: Targeted & Relative Performance Paths (Part 1)
2024-10-08 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 1 of a 2 Part presentation. Viewing of this webinar is required to participate in Part 2

Stretch Energy Code 2023 for Commercial Buildings: Targeted Performance/Relative Performance Compliance Paths (Part 2)
2024-10-10 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 2 of a two part presentation. Previous attendance at Part 1 is required to participate in this webinar.

R4.1 - Residential Mechanical Systems, Hot Water, and Lighting
2024-10-30 13:00 - 14:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Building official, 1 RESNET PDH
Part 1:
Mechanical systems and service water heating systems are key elements to energy performance of residential buildings. At the same time, code provisions related to these systems are among those with least code compliance. This course covers code provisions with the highest energy impacts and suggestions for verifying compliance during plan reviews and inspections.

C2.2 - 2023 Commercial Energy Code: Thermal Bridging and Derating
2024-10-30 14:05 - 15:05
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
2023 Commercial Energy Code: Air Barriers and Thermal Bridging
Description:
This specialized course delves into the critical aspects of thermal bridging and derating within the framework of the commercial provisions of the Massachusetts Stretch Energy Code. Participants will explore the intricacies of these concepts and learn how to navigate the code’s requirements to achieve optimal energy performance in commercial building design and construction.
Learning Objectives:
• Interpret and apply the code’s requirements related to thermal bridging and derating.
• Utilize derating as a method to account for thermal bridging effects in building assemblies.
• Learn methods for quantifying thermal bridging in commercial building designs.
• Develop strategies for designing commercial building envelopes that minimize thermal bridging.

R4.2 - Equipment Sizing, Manual J and S
2024-11-13 13:00 - 14:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 1 CSL (Topic- Energy), 1 BPI, 1 Code Official
Residential Webinar – Equipment Sizing, Manual J and S
COURSE DESCRIPTION:
According to the 2015-16 study on single-family residential homes, only 14% of homes meet the code requirement of designing mechanical equipment based on ACCA Manual S and Manual J. This course covers Manual S requirements and why following Manual S would not only lower energy bills, but also increase comfort. The discussion will include the ACCA design process, Manual J load calculation process & modeling, which is the first step in sizing equipment properly, Manual S over-sizing provisions, available software tools to carry out Manual S calculations, and ends with a case study demonstrating how the Manual J and Manual S process works.
LEARNING OBJECTIVES:
1: Provide background on the Air Conditioning Contracts of America (ACCA)
2: Discuss the purpose and use of ACCA Manual D
3: Discuss the purpose and use of ACCA Manual J
4: Discuss the purpose and use of ACCA Manual S

C7.1 - Building Systems Commissioning: Saving Money and Meeting Code
2024-11-13 14:05 - 15:05
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 1 CSL (Code Review), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – Building Systems Commissioning: Saving Money and Meeting Code
COURSE DESCRIPTION:
Building commissioning reduces energy bills, improves comfort, reduces CO2 and other emissions, and… it is the law. According to data from US Energy Information Administration (EIA), in 2018 commercial buildings accounted for over 18% of the energy consumed in the US, with over half that energy dedicated to heating, cooling, and lighting. While most building owners and builders understand the importance of high-efficacy lighting and efficient HVAC systems, the importance of building system commissioning is less widely appreciated. Studies have shown that the operating efficiency of commercial buildings improves by as much as 13% with commissioning.
This course will provide an overview of mechanical systems and lighting commissioning including the benefits to building owners and occupants, the general commissioning process, and a review of energy code requirements and associated documentation. The course will also identify the roles that building owners, builders, code officials, and commissioning agents play in the commissioning process and highlight relevant industry standards and certifications.
LEARNING OBJECTIVES:
Attendees will be able to…
1. Describe the code requirements for building systems commissioning.
2. Understand the different phases of the commissioning process.
3. Identify the roles of building owners, commissioning providers, builders, and building code officials.
4. Provide and review the required commissioning documentation.

Choosing the Right Commercial Compliance Path: Documentation and Tools
2024-11-14 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
MA- Choosing the Right Commercial Compliance Path: Documentation and Tools
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 2 CSL (Energy), 2 AIA, 2 BPI, 2 Code Official

(R5.1) The Energy Code and Existing Buildings (Residential) - Part 1 (NYSERDA Energy Code Training)
2024-11-19 08:30 - 10:00
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 1
T02-07-3138
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

Energy Modeling for Commercial Compliance Pathways (Part 1)
2024-11-19 10:00 - 12:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 1 of a 4 Part presentation. Viewing all parts is required to receive credit.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 2 CSL (Topic – Energy), 2 AIA, 2 BPI, 2 Code Official
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

(R5.2) The Energy Code and Existing Buildings (Residential) - Part 2 (NYSERDA Energy Code Training)
2024-11-19 10:15 - 11:45
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 2
T02-07-3139
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

Energy Modeling for Commercial Compliance Pathways (Part 2)
2024-11-19 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 2 of a 4 Part presentation. Viewing all parts is required to receive credit.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 2 CSL (Topic – Energy), 2 AIA, 2 BPI, 2 Code Official
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

Energy Modeling for Commercial Compliance Pathways (Part 3)
2024-11-21 10:00 - 12:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 3 of a 4 Part presentation. Viewing all parts is required to receive credit.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 2 CSL (Topic – Energy), 2 AIA, 2 BPI, 2 Code Official
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

Energy Modeling for Commercial Compliance Pathways (Part 4)
2024-11-21 13:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
This is Part 4 of a 4 Part presentation. Viewing all parts is required to receive credit.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 2 CSL (Topic – Energy), 2 AIA, 2 BPI, 2 Code Official
Course Description:
Under the new Massachusetts Stretch Code, 225 CMR 23, new commercial buildings over 20,000 square feet must use a performance path for compliance. This two-part training series focuses on the two most common performance-based compliance options, Targeted Performance and Relative Performance. The Targeted Performance path requires projects to use energy modeling to demonstrate compliance with the heating and cooling Thermal Energy Demand Intensity (TEDI) targets. The Relative Performance path is based on ASHRAE 90.1 Appendix G Performance Rating Method with Massachusetts amendments. This training will cover the energy modeling requirements of both compliance options in detail including covering special rules for retrofits, additions, and core-and-shell projects. The training will also provide a high-level refresher of specific topics covered in the 4-hour MA Stretch 2023 targeted and relative performance path training including requirements other than energy modeling that projects must meet and the documentation that must be submitted to code officials.
Learning Objectives:
1. Understand the modeling requirements associated with the Targeted Performance Path and the Relative Performance Path for MA Commercial Stretch Energy Code compliance.
2. Comprehend the modeling requirements for special cases including core-and-shell projects and first-time tenant fit outs.
3. Develop a high-level, basic understanding of MA Stretch 2023 mandatory requirements and the types of 90.1 mandatory requirements that projects are required to comply with.

C7.1 - Building Systems Commissioning: Saving Money and Meeting Code
2024-11-26 14:00 - 15:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 1 CSL (Code Review), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – Building Systems Commissioning: Saving Money and Meeting Code
COURSE DESCRIPTION:
Building commissioning reduces energy bills, improves comfort, reduces CO2 and other emissions, and… it is the law. According to data from US Energy Information Administration (EIA), in 2018 commercial buildings accounted for over 18% of the energy consumed in the US, with over half that energy dedicated to heating, cooling, and lighting. While most building owners and builders understand the importance of high-efficacy lighting and efficient HVAC systems, the importance of building system commissioning is less widely appreciated. Studies have shown that the operating efficiency of commercial buildings improves by as much as 13% with commissioning.
This course will provide an overview of mechanical systems and lighting commissioning including the benefits to building owners and occupants, the general commissioning process, and a review of energy code requirements and associated documentation. The course will also identify the roles that building owners, builders, code officials, and commissioning agents play in the commissioning process and highlight relevant industry standards and certifications.
LEARNING OBJECTIVES:
Attendees will be able to…
1. Describe the code requirements for building systems commissioning.
2. Understand the different phases of the commissioning process.
3. Identify the roles of building owners, commissioning providers, builders, and building code officials.
4. Provide and review the required commissioning documentation.

(C6.1) Foam without Flames – Part 1 – Thermal Bridging (NYSERDA Energy Code Training)
2024-12-03 12:30 - 14:00
NYSERDA Energy Code Training provided by Performance Systems Development
Foam without Flames – Part 1 – Thermal Bridging
T02-07-3230
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Reducing thermal bridging is one of the keys to reducing energy waste in buildings and, to that end, the prescriptive energy code contains requirements for continuous insulation for roofs, above-and below-grade walls, and mass floors. This program will provide an overview of the thermal envelope requirements in the ECCCNYS [CE] and NYStretch [CE] as they relate to continuous insulation. This will be followed by a discussion the types of construction as categorized by the Building Code of New York State (Types I, II, III, IV, V) and associated fire-resistance rating requirements and fire separation distance requirements, and NFPA 285 test for vertical and lateral flame spread as they relate to exterior foam applications.
LEARNING OBJECTIVES
1. Understand the impact of thermal bridging on building energy performance
2. Describe the prescriptive requirements in the commercial IECC for continuous insulation
3. Determine fire-resistance rating and fire separation distance requirements in the context of using continuous insulation
4. Locate third-party testing documentation related to product testing for flame spread

(C6.2) Foam without Flames – Part 2 – Fire Rated Assemblies (NYSERDA Energy Code Training)
2024-12-03 14:15 - 15:45
NYSERDA Energy Code Training provided by Performance Systems Development
Foam without Flames – Part 2 – Fire Rated Assemblies
T02-07-3237
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
Reducing thermal bridging is one of the keys to reducing energy waste in buildings and, to that end, the prescriptive energy code contains requirements for continuous insulation for roofs, above-and below-grade walls, and mass floors. This program will provide an overview of the thermal envelope requirements in the ECCCNYS [CE] and NYStretch [CE] as they relate to continuous insulation. This will be followed by a discussion the types of construction as categorized by the Building Code of New York State (Types I, II, III, IV, V) and associated fire-resistance rating requirements and fire separation distance requirements, and NFPA 285 test for vertical and lateral flame spread as they relate to exterior foam applications.
LEARNING OBJECTIVES:
1. Understand the impact of thermal bridging on building energy performance
2. Describe the prescriptive requirements in the commercial IECC for continuous insulation
3. Determine fire-resistance rating and fire separation distance requirements in the context of using continuous insulation
4. Locate third-party testing documentation related to product testing for flame spread

(C4.1) Electrifying the Energy Code - Commercial (NYSERDA Energy Code Training)
2024-12-04 08:30 - 10:00
NYSERDA Energy Code Training provided by Performance Systems Development
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
C4.1- Electrifying the Energy Code
T02-07-3134
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The first part of the program will cover IECC Appendix CA: Solar-Ready Zone along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. This section will also discuss what it means to include a “collateral dead load” in gravity and lateral design calculations for the roof.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(C4.2) Electrifying the Energy Code - Commercial (NYSERDA Energy Code Training)
2024-12-04 10:15 - 11:45
NYSERDA Energy Code Training provided by Performance Systems Development
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
C4.2- Electrifying the Energy Code
T02-07-3141
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The second part of the program will cover the EV Charging Station Capable requirements and provide detailed coverage of the five additional power distribution packages in NYStretch Appendix CC. A particular emphasis will be placed on how to accomplish the requirements for the more complex packages, including electrical energy monitoring and interoperable automated demand response.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

R4.3 Duct Sealing and Testing
2024-12-11 13:00 - 14:00
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
Please be advised that GoToWebinar is only compatible with the browsers Firefox and Chrome.
If requesting BPI, AIA, CSL, or MA Code Official CEUs, a corresponding ID number must be provided.
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official, 1 RESNET PDH
Part 3:
According to a 2015-16 study on single-family residential homes, over 90% of all homes studied had all or portion of duct systems in unconditioned space which means all these homes would require duct testing and portions outside conditioned space should be insulated. This course discusses code requirements for duct testing, prescriptive duct leakage requirements, duct insulation and sealing requirements. With a discussion on best practices in duct insulation, the presenter will discuss Manual D which is a process to design duct systems and required by code.
