(R7.1) Put a Lid On It Part 1: Unvented Attics
2023-08-24 10:15 - 11:45, 2023-09-14 10:15 - 11:45 (America/New_York) | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R7.1 – Put a Lid On It Part 1 – Unvented Attics
T02-07-3192
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Bringing attic and crawl spaces inside the thermal envelope is a great way to simultaneously improve energy efficiency and moisture management. One of the main ways unvented attics and crawl spaces reduce energy waste is by bringing ducts and air handlers inside (which is a requirement of NYStretch and the NYCECC). This can also be cost-effective for builders as they eliminate the requirement for duct testing. But there are risks associated with installing these assemblies improperly, so it is important to meet all related requirements in the RCNYS. For unvented attics, these include a minimum R-value of air impermeable insulation or above-roof deck insulation and proper installation and location of vapor retarders. For unvented crawl spaces, builders must take care to install vapor barriers over exposed earth and provide a means of evacuating moisture. For both strategies, the use of spray foam also brings in fire safety requirements from the RCNYS for thermal or ignition barriers. This course will provide a review of the benefits of unvented attics and crawl spaces, related building science concepts, and energy and residential code requirements.
Learning Objectives:
1- Describe the energy efficiency benefits of unvented attics and crawl spaces
2- Describe durability benefits of unvented attics and crawl spaces
3- Understand energy code requirements related to these assemblies

(S3.1) NYStretch Energy Code for Commercial Buildings (Pt 1)
2023-08-29 08:30 - 10:00, 2023-09-19 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
S3.1 NYStretch Energy Code for Commercial Buildings (Pt 1) 90 minutes
T02-07-2987
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 1 of a two-part series covering several requirements in the NYStretch Code for commercial buildings including: code compliance paths; building thermal envelope; mechanical systems; service water heating; commissioning; and, additions and alterations. We also discuss the intention and benefits of this voluntary code and its relationship to the New York City energy code.
Learning objectives:
1-Identify all available energy code compliance pathways under NYStretch
2- Identify differences between NYStretch and the base energy code
3-Understand which provisions are modifications of the IECC/ASHRAE versus an expansion in scope
4- Identify and understand all mandatory requirements (items that must be met regardless of compliance path)

(S3.2) NYStretch Energy Code for Commercial Buildings (Pt 2)
2023-08-29 10:15 - 11:45, 2023-09-19 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(S3.2) NYStretch Energy Code for Commercial Buildings (Pt 2) 90 minutes
T02-07-2991
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 2 of a two-part series covering several requirements in the NYStretch Code for commercial buildings including: Electric Power; Appendix CA; Kitchen Equipment and Elevators; Building Monitoring; Lighting; Total Building Performance; Additional Efficiency Packages and Appendix CC. We also discuss the intention and benefits of this voluntary code and its relationship to the New York City energy code.
Learning objectives:
1- Understand requirements for Electric Power and Lighting under NYStretch.
2- Understand requirements for Appendix CA Solar-Ready.
3- Identify requirements for commercial kitchen appliances and elevators.
4- Understand which provisions are modifications of the base code versus an expansion in scope.

R2.3 2023 Massachusetts Existing Buildings Alterations
2023-08-30 01:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
MA R2.3 Existing Buildings Alterations
In this module we will discuss Existing Building Alterations to buildings 1000 sqft and under, and later 1000 sqft and over. Students will be taken through Stretch Code Introduction and Updates. We will also go over HERS Permit and CO Requirements, repairs, and Solar Ready.
• Introduction
• Existing Buildings Additions
• Additions 1000sqft. and Under
• Stretch Code Introduction
• Stretch Code Updates
• Additions Over 1000sqft.
• HERS Permit & CO Requirements
• Repairs
• Solar Ready and Additions

C1.3 Commercial Stretch Code Solar Ready and EV Ready
2023-08-30 02:05 - 15:05 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
2023 Commercial Stretch and Specialized Code
Part 3: Solar Ready and EV Ready
This regulation (225 CMR 23) will become effective on July 1, 2023, and aims to be in line with the upcoming 10th Edition of the Massachusetts State Building Code (780 CMR). The objective of this training program is to provide information to code enforcement officials, contractors, and design professionals regarding the updates and changes between the 2018 and 2021 IECC, as well as the new Municipal Opt-in Specialized Code for 2023.
In this course we will look into the requirements of the Stretch Energy Code for solar ready and EV ready provisions. Topics include Potential Solar Zone Area, Zero Energy Buildings, Electric Vehicle Supply Equipment and Automatic Load Management Service.
Learning Objectives
1. Know when a project is exempt from the requirements to provide solar ready zones.
2. Learn how to calculate the solar ready zone when required on a commercial building.
3. Be able to determine the requirements for compliance with the EV Ready Space requirement.
4. Gain knowledge of electrical load management for EV parking demands

(R3.1) Residential Mechanical Systems: Whole House Ventilation (Pt 1)
2023-08-30 08:30 - 10:00, 2023-09-20 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R3.1 Residential Mechanical Systems: Whole House Ventilation Part 1
T02-07-2857
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Build Tight, Ventilate Right Background
Building Tight: Why?
Ventilating Right: Why and How?
Ventilation Codes and Standards
Ventilation Types: Pros and Cons

(R3.2) Residential: Efficient Forced Air Distribution (Pt 2)
2023-08-30 10:15 - 11:45, 2023-09-20 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R3.2 Residential: Efficient Forced Air Distribution Part 2
T02-07-2862
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
In this course attendees will understand the importance of duct testing, sealing, and installation on the total performance of a house heating and cooling system. Attendees will be able to distinguish various code requirements based on duct proximity to the building thermal envelope. In addition, attendees will learn duct insulation requirements and methods. Attendees will be introduced to a customizable Duct and Envelope Testing (DET) reporting form to make demonstrating code compliance straightforward and efficient.
Learning Objectives:
1. Understand the consequences of leaky duct systems
2. Understand how to achieve tight ducts
3. Identify and resolve other common duct installation problems
4. Utilize the provided duct and envelope testing (DET) form to document or verify compliance with duct testing requirements

(C4.1) Electrifying the Energy Code - Commercial
2023-08-31 08:30 - 10:00, 2023-09-21 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C4.1- Electrifying the Energy Code
T02-07-3134
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The first part of the program will cover IECC Appendix CA: Solar-Ready Zone along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. This section will also discuss what it means to include a “collateral dead load” in gravity and lateral design calculations for the roof.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(C4.2) Electrifying the Energy Code - Commercial
2023-08-31 10:15 - 11:45, 2023-09-21 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C4.2- Electrifying the Energy Code
T02-07-3141
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The second part of the program will cover the EV Charging Station Capable requirements and provide detailed coverage of the five additional power distribution packages in NYStretch Appendix CC. A particular emphasis will be placed on how to accomplish the requirements for the more complex packages, including electrical energy monitoring and interoperable automated demand response.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(R1.1) Residential Energy Plan Reviews in 15 Minutes or Less (Pt 1)
2023-09-05 08:30 - 10:00, 2023-09-26 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential Energy Plan Reviews in 15 Minutes or Less (Pt 1)
T02-07-2829
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Countless previous research shows that code officials have very limited time to perform thorough plan reviews and that energy code provisions are often the first items to be jettisoned. This webinar is Part 1 of a two-part series, and will not only help code officials, but also those responsible for preparing construction documents. Participants will understand what’s required to do quick – yet thorough – document submittals and plan reviews. Sample checklists, worksheets and other forms will be discussed and downloadable.
LEARNING OBJECTIVES:
1. Describe a process for reviewing residential plans that includes assessing the highest impact energy code provisions
2. Understand the inputs to provided forms and checklists such as duct and envelope testing verification and HVAC design forms and integrate them into your organization’s normal compliance documentation or enforcement processes
3. Recreate a timeline that includes which construction details and verification forms needed to be provided/collected
4. Describe how third-party energy professionals such as duct and envelope testers and HERS Raters fit into the inspection process

(R1.2) Residential Energy Inspections in 15 Minutes or Less (Pt 2)
2023-09-05 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential Energy Inspections in 15 Minutes or Less (Pt 2)
T02-07-2863
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
Countless previous research shows that code officials have very limited time to perform thorough energy code inspections. This 90-minute webinar will cover the five required inspections: footing and foundation; Framing and rough-in; Plumbing, Mechanical and Final. Part 2 of a two-part series, this course will not only help code officials but also those responsible for designing and constructing residential buildings. Participants will understand what’s required to do quick – yet thorough – site inspections. Sample inspection checklists, worksheets and other forms will be discussed and downloadable.
Learning objectives:
After taking this course, attendees will be able to…
1. Describe a process for inspecting residential construction that includes assessing the highest impact energy code provisions
2. Understand the inputs to provided forms and checklists such as duct and envelope testing verification and HVAC design forms and integrate them into your organization’s compliance documentation or enforcement processes
3. Recreate a timeline that includes which construction details and verification forms need to be provided/collected and when in the design/construction process
4. Describe how third-party energy professionals such as duct and envelope testers and HERS Raters fit into the inspection process

(C1.1) Mechanical Systems for Large Commercial Buildings (Pt 1)
2023-09-06 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(C1.1) Mechanical Systems for Large Commercial Buildings (Part 1)
T02-07-2910
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
Large commercial buildings are common in large urban areas, and while less common in suburban and rural areas, they have large per-building energy impacts. This program will prepare design professionals and code enforcement officials ensure their work results in buildings with better-than-average energy use intensities.
Attendees will be asked to pinpoint the locations in construction documents where various mechanical controls and equipment specifications are (or should be). Guided discussions will help attendees identify the best ways to provide adequate documentation on plans and inspect or elucidate control configurations in the field.
Learning Objectives:
Attendees will be able to…
1. Understand the types and basic functions of common and complex HVAC systems
2. Identify where ventilation and related equipment are required including economizers, demand-controlled ventilation, and energy recovery ventilation
3. Understand fan power limitation calculations and how to determine if systems meet code limits
4. Know when commissioning is required and identify what is needed to show compliance

(C1.2) Lighting Systems for Large Commercial Buildings (Pt 2)
2023-09-06 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(C1.2) Lighting Systems for Large Commercial Buildings Part 2
T02-07-2908
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Large commercial buildings are common in large urban areas, and while less common in suburban and rural areas, they have large per-building energy impacts. This program will prepare design professionals and code enforcement officials to ensure their work results in buildings with better-than-average energy use intensities.
Attendees will be asked to pinpoint the locations in construction documents where various lighting controls and equipment specifications are (or should be). Attendees will understand lighting power code requirements for both interior and exterior applications. Guided discussions will help attendees identify the best ways to provide adequate documentation on plans and inspect or elucidate control configurations in the field.
Learning objectives:
1- Understand the 2020 ECCCNYS code requirements for commercial lighting systems
2- Understand lighting power density calculations and how to determine if building and space types meet code limits
3- Understand how to do calculate exterior lighting power allowances
4- How to provide evidence of lighting functional testing

(R5.1) The Energy Code and Existing Buildings (Residential) - Part 1
2023-09-07 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 1
T02-07-3138
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

(R5.2) The Energy Code and Existing Buildings (Residential) - Part 2
2023-09-07 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – The Energy Code and Existing Buildings – Part 2
T02-07-3139
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course will provide a review of IECC Chapter 5 [RE] provisions with an emphasis on situations where work performed on existing buildings requires them to meet the energy code like new construction. This includes additions, new thermal envelope assemblies built as part of an alteration, window replacements, new heating, cooling and duct systems, new service hot water systems, new lighting where 50 percent or more of the luminaires are replaced, changes from unconditioned to conditioned space, and commercial spaces converted to dwelling units. The course will provide numerous examples and ask attendees to identify the energy code requirements for each scenario.
LEARNING OBJECTIVES
-Determine when construction in existing buildings needs to meet the energy code like new construction
-Determine situations where exceptions apply
-Utilize REScheck to document, determine, and document exceptions
-Understand various prescriptive energy code requirements for existing building projects requiring compliance, like new construction

(S2.1) NYStretch Energy Code for Residential Buildings 90 minute (Pt 1)
2023-09-12 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
S2.1 NYStretch Energy Code for Residential Buildings 90 minute (Pt 1)
T02- 07-2977
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 1 of a two-part series covering the envelope requirements for residential buildings in the NYStretch Code. We also discuss the intention and benefits of this voluntary code and its relationship to the New York City energy code.
Learning objectives:
1. Understand the intent and savings potential of the residential provisions of NYStretch
2. Identify all available energy code compliance pathways under NYStretch
3. Identify differences between NYStretch (or NYCECC) and the base code
4. Identify and understand all mandatory requirements (items that must be met regardless of compliance path)

The 2018 IECC for Pennsylvania - Residential
2023-09-12 08:30 - 12:00 | Courtyard by Marriott Pittsburgh North/Cranberry Woods, 150 Cranberry Woods Drive, Cranberry Township, PA, 16066, United States
The 2018 IECC went into effect on February 14, 2022 bringing with it significant energy savings, mainly from improved envelope tightness. This training will include a high-level review of building science concepts including basic thermodynamics (how heat moves), including stack effect, and conditions that result in optimum occupant comfort. The program will focus on high-impact energy code provisions and items with relatively high noncompliance as found by a DOE/PNNL field study completed in 2018. Specific topics will include envelope insulation, air sealing, and testing, whole-house mechanical ventilation, HVAC equipment sizing, duct insulation, sealing, and testing, and service hot water pipe insulation and circulating system controls. Instructors will also present the use of checklists and third-party verification forms.
Learning objectives:

Identify significant changes between the 2015 and 2018 IECC
Describe the science behind building energy efficiency and occupant comfort and productivity
Identify the energy code provisions with high impact but low compliance rates
Understand how reduced air infiltration rate requirements will impact design, construction, and code enforcement

Continuing Education: Three (3) hours. PA UCC, ICC, AIA LU|HSW, RESNET, NARI, BPI

Breakfast included

(S2.2) NYStretch Energy Code for Residential Buildings 90 minute (Pt 2)
2023-09-12 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
(S2.2) NYStretch Energy Code for Residential Buildings 90 minute (Pt 2)
T02-07-2976
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
This course is Part 2 of a two-part series and covers the mechanical, plumbing and lighting requirements for residential buildings in the NYStretch Code, as well as requirements covering electric power systems. We will also discuss the relationship of this voluntary code to the mandatory New York City energy code.
Learning objectives:
1. Identify how mechanical equipment efficiencies and lighting factor into each energy code compliance option under NYStretch
2. Identify differences between NYStretch the base code for mechanical, plumbing and lighting systems
3. Understand the Electric Power (Solar-ready and EV-ready) requirements
4. Identify and understand all mandatory requirements (items that must be met regardless of compliance path)

The 2018 IECC for Pennsylvania – Commercial
2023-09-12 13:00 - 16:30 | Courtyard by Marriott Pittsburgh North/Cranberry Woods, 150 Cranberry Woods Drive, Cranberry Township, PA, 16066, United States
The 2018 IECC went into effect on February 14, 2022 bringing with it an annual savings of up to 14 percent. This training will include a high-level review of building science concepts including basic thermodynamics (how heat moves), including stack effect, and conditions that result in optimum occupant comfort and productivity. The program will focus on high-impact energy code provisions and items with relatively high noncompliance as found by a recent PNNL commercial energy efficiency field study. Specific topics will include envelope insulation and air sealing, mechanical system control configurations, economizers, kitchen ventilation, energy recovery ventilation, demand control ventilation, and lighting controls. These topics will be framed in terms of entering and reviewing COMcheck inputs and outputs for accuracy regarding the submitted construction documents. Instructors will also present the use of example checklists throughout the program.
Learning objectives:

Identify significant changes between the 2015 and 2018 IECC
Describe the science behind building energy efficiency and occupant comfort and productivity
Identify the energy code provisions with high impact but low compliance rates
Describe mechanical system and lighting control configuration requirements

Continuing Education: Three (3) hours. PA UCC, ICC, AIA LU|HSW, BPI

Lunch included

(C2.1) Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 1)
2023-09-13 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C2.1 Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 1) Envelope
T02-07-2940
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
In a robust study of commercial buildings, 21% of the energy code provisions investigated were responsible for 81% of the potential savings. This created a framework for prioritizing energy code enforcement efforts based on the time it takes to verify a code provision versus the energy savings potential. With code enforcement officials being strapped for time and having other life-health safety priorities, this course, Part 1 of a two-part series, covering high-impact commercial envelope requirements, will help them prioritize efforts, improve compliance, and maximize the realization of savings inherent in the energy code.
Learning Objectives:
1. Identify energy code envelope requirements with the greatest energy impacts and prioritize energy code documentation
2. Describe a process for creating and reviewing plans that includes documenting and assessing the highest impact energy code provisions related to envelope
3. Understand how to integrate provided construction details verification forms and checklists into normal compliance documentation or enforcement processes
4. Identify permit application specifications that enable a simplified plan review process as well as a process for providing or collecting verification forms

(C2.2) Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 2)
2023-09-13 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C2.2 Prioritizing ECCCNYS Enforcement for Commercial Buildings Pt 2
T02-07-2947
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
In a robust study of commercial buildings, 21% of the energy code provisions investigated were responsible for 81% of the potential savings. This created a framework for prioritizing energy code enforcement efforts based on the time it takes to verify a code provision versus the energy savings potential. With code enforcement officials being strapped for time and having other life-health safety priorities, this course, Part 2 of a two-part series, covering high-impact commercial mechanical and lighting requirements, will help them prioritize efforts, improve compliance, and maximize the realization of savings inherent in the energy code.
Learning objectives:
1- Identify the energy code requirements with the greatest energy impacts and prioritize energy code documentation
2- Describe a process for creating and reviewing plans that includes documenting and assessing the highest impact energy code provisions
3- Understand how to integrate provided construction details verification forms and checklists into normal compliance documentation or enforcement processes
4- Identify permit application specifications that enable a simplified plan review process as well as a process for providing or collecting verification forms

(R4.0) Electrifying the Energy Code - Residential
2023-09-14 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – Electrifying the Energy Code
T02-07-3133
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Following an introduction to the benefits of electrification, this course will review the requirements of IECC Appendix RA (Solar-Ready Provisions) along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. The course will walk through several examples and ask attendees to determine whether the solar-ready provisions apply to a particular building, given its type, orientation, roof design and other considerations. The course will also review examples of how to fit in the required solar ready zone considering obstructions and required setbacks. Example documentation will also be reviewed. Finally, the course will cover the electric vehicle service equipment capable requirements of NYStretch and how adopting these provisions will help with the electrification of New York’s transportation system.
Learning Objectives
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch and IECC Appendix RA
